D-Link DGS-3120-24TC Product Manual - Page 275

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide Figure 10-3 CFM MA Settings (Edit) Window The fields that can be configured are described below: Parameter Description MIP This is the control creation of MIPs. None - Don't create MIPs. Auto - MIPs can always be created on any ports in this MA, if that port is not configured with a MEP of that MA. Explicit - MIP can be created on any ports in this MA, only if the next existent lower level has a MEP configured on that port, and that port is not configured with a MEP of this MA. Defer - Inherit the setting configured for the maintenance domain that this MA is associated with. This is the default value. SenderID This is the control transmission of the sender ID TLV. None - Don't transmit sender ID TLV. This is the default value. Chassis - Transmit sender ID TLV with chassis ID information. Manage - Transmit sender ID TLV with manage address information. Chassis Manage - Transmit sender ID TLV with chassis ID information and manage address information. Defer - Inherit the setting configured for the maintenance domain that this MA is associated with. This is the default value. CCM This is the CCM interval. 10ms - 10 milliseconds. Not recommended. For test purpose. 100ms - 100 milliseconds. Not recommended. For test purpose. 1sec - One second. 10sec - Ten seconds. This is the default value. 1min - One minute. 10min - Ten minutes. MEP ID(s) This is to specify the MEP IDs contained in the maintenance association. The range of the MEP ID is 1-8191. Add - Add MEP ID(s). Delete - Delete MEP ID(s). By default, there is no MEP ID in a newly created maintenance association. Click the Apply button to accept the changes made. After clicking the MIP Port Table button, the following page will appear: 267