D-Link DGS-3120-24TC Product Manual - Page 303
Monitoring > Mirror > RSPAN Settings, Apply, Modify, Delete, VLAN Name, Source Ports, RX, TX
View all D-Link DGS-3120-24TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 303 highlights
xStack® DGS-3120 Series Managed Switch Web UI Reference Guide NOTE: RSPAN VLAN mirroring will only work when RSPAN is enabled (when one RSPAN VLAN has been configured with a source port). The RSPAN redirect function will work when RSPAN is enabled and at least one RSPAN VLAN has been configured with redirect ports. To view this window, click Monitoring > Mirror > RSPAN Settings as shown below: Figure 11-17 RSPAN Settings window The fields that can be configured are described below: Parameter Description RSPAN State Click the radio buttons to enable or disable the RSPAN feature. VLAN Name Create the RSPAN VLAN by VLAN name. VID Create the RSPAN VLAN by VLAN ID. Click the Apply button to accept the changes made. Click the Add button to add a new entry based on the information entered. Click the Modify button to re-configure the specific entry. Click the Delete button to remove the specific entry. After clicking the Modify button, the following page will appear: Figure 11-18 RSPAN Settings - Modify window The fields that can be configured are described below: Parameter Description VID VLAN Name Source Ports Displays the RSPAN VLAN by VLAN ID. Displays the RSPAN VLAN by VLAN name. If the ports are not specified by option, the source of RSPAN will come from the source specified by the mirror command or the flow-based source specified by an ACL. If no parameter is specified for source, it deletes the configured source parameters. Select RX, TX or Both to specify in which direction the packets will be monitored. 295