D-Link DGS-3120-24TC Product Manual - Page 25
System Severity Settings, Interface Name, IPv4 Address, IPv6 Address EI Mode, Apply, Clear, System - / si
View all D-Link DGS-3120-24TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
xStack® DGS-3120 Series Managed Switch Web UI Reference Guide Figure 2-16 System Log & Trap Settings window (SI Mode Only) Figure 2-17 System Log & Trap Settings window (EI Mode Only) The fields that can be configured are described below: Parameter Description Interface Name Enter the IP interface name used. IPv4 Address Enter the IPv4 address used. IPv6 Address (EI Mode Only) Enter the IPv6 address used. Click the Apply button to accept the changes made. Click the Clear button to clear all the information entered in the fields. System Severity Settings The Switch can be configured to allow alerts be logged or sent as a trap to an SNMP agent. The level at which the alert triggers either a log entry or a trap message can be set as well. Use the System Severity Settings window to set the criteria for alerts. The current settings are displayed below the System Severity Table. To view the following window, click System Configuration > System Log Configuration > System Severity Settings, as show below: Figure 2-18 System Severity Settings window 17