D-Link DGS-3120-24TC Product Manual - Page 74

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide Parameter Description GVRP State Click the radio buttons to enable or disable the GVRP State. Join Time Enter the Join Time value in milliseconds. Leave Time Enter the Leave Time value in milliseconds. Leave All Time Enter the Leave All Time value in milliseconds. NNI BPDU Address Used to determine the BPDU protocol address for GVRP in service provide site. It can use 802.1d GVRP address, 802.1ad service provider GVRP address or a user defined multicast address. The range of the user defined address is 0180C2000000 0180C2FFFFFF. Click the Apply button to accept the changes made for each individual section. NOTE: The Leave Time value should be greater than twice the Join Time value. The Leave All Time value should be greater than the Leave Time value. GVRP Port Settings On this page the user can configure the GVRP port parameters. To view the following window, click L2 Features > VLAN > GVRP > GVRP Port Settings, as show below: Figure 4-12 GVRP Port Settings window The fields that can be configured are described below: Parameter Description Unit From Port / To Port PVID Select the unit you want to configure. Select the starting and ending ports to use. This field is used to manually assign a PVID to a VLAN. The Switch's default is to assign all ports to the default VLAN with a VID of 1.The PVID is used by the port to tag outgoing, untagged packets, and to make filtering decisions about incoming 66