D-Link DGS-3120-24TC Product Manual - Page 33

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide Chapter 3 Management ARP Gratuitous ARP IPv6 Neighbor Settings (EI Mode Only) IP Interface Management Settings Session Table Single IP Management SNMP Settings Telnet Settings Web Settings ARP Static ARP Settings The Address Resolution Protocol is a TCP/IP protocol that converts IP addresses into physical addresses. This table allows network managers to view, define, modify, and delete ARP information for specific devices. Static entries can be defined in the ARP table. When static entries are defined, a permanent entry is entered and is used to translate IP addresses to MAC addresses. To view the following window, click Management > ARP > Static ARP Settings, as show below: Figure 3-1 Static ARP Settings window The fields that can be configured are described below: Parameter Description ARP Aging Time (0-65535) The ARP entry age-out time, in minutes. The default is 20 minutes. IP Address The IP address of the ARP entry. MAC Address The MAC address of the ARP entry. Click the Apply button, located in the Global Settings section to accept the changes made in this section. Click the Apply button, located in the Add Static ARP Entry section to accept the changes made in this section. Click the Delete All button to remove all the entries listed. Click the Edit button to re-configure the specific entry. Click the Delete button to remove the specific entry. 25