D-Link DGS-3120-24TC Product Manual - Page 175

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide Figure 7-24 Add CPU ACL Profile (Ethernet ACL) The fields that can be configured are described below: Parameter Description Profile ID (1-5) Select ACL Type Source MAC Mask Destination MAC Mask 802.1Q VLAN 802.1p Ethernet Type Enter a unique identifier number for this profile set. This value can be set from 1 to 5. Select profile based on Ethernet (MAC Address), IPv4 address, IPv6 address, or packet content mask. This will change the window according to the requirements for the type of profile. Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header. Select IPv4 to instruct the Switch to examine the IP address in each frame's header. Select IPv6 to instruct the Switch to examine the IP address in each frame's header. Select Packet Content Mask to specify a mask to hide the content of the packet header. Enter a MAC address mask for the source MAC address. Enter a MAC address mask for the destination MAC address. Selecting this option instructs the Switch to examine the VLAN identifier of each packet header and use this as the full or partial criterion for forwarding. Selecting this option instructs the Switch to specify that the access profile will apply only to packets with this 802.1p priority value. Selecting this option instructs the Switch to examine the Ethernet type value in each frame's header. Click the Select button to select a CPU ACL type. Click the Create button to create a profile. 167