D-Link DGS-3120-24TC Product Manual - Page 61

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide SNMPv6 Host Table Settings (EI Mode Only) Users can set up SNMP trap recipients for IPv6. To view the following window, click Management > SNMP Settings > SNMPv6 Host Table Settings, as show below: 3-42 SNMPv6 Host Table Settings The fields that can be configured are described below: Parameter Description Host IPv6 Address Type the IPv6 address of the remote management station that will serve as the SNMP host for the Switch. User-based Security Model SNMPv1 - Specifies that SNMP version 1 will be used. SNMPv2 - Specifies that SNMP version 2 will be used. SNMPv3 - Specifies that SNMP version 3 will be used. Security Level NoAuthNoPriv - To specify that the SNMP version 3 will be used, with a NoAuthNoPriv security level. AuthNoPriv - To specify that the SNMP version 3 will be used, with an Auth-NoPriv security level. AuthPriv - To specify that the SNMP version 3 will be used, with an Auth-Priv security level. Community String / Type in the community string or SNMP V3 user name as appropriate. SNMP V3 User Name Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. RMON Settings On this page the user can enable or disable remote monitoring (RMON) for the rising and falling alarm trap feature for the SNMP function on the Switch. To view the following window, click Management > SNMP Settings > RMON Settings, as show below: Figure 3-43 RMON Settings window The fields that can be configured are described below: Parameter Description RMON Rising Alarm Enable this option to use the RMON Rising Alarm Trap Feature. 53