D-Link DGS-3120-24TC Product Manual - Page 159
Source MAC Mask, Select ACL Type
View all D-Link DGS-3120-24TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
xStack® DGS-3120 Series Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description Profile ID Enter a unique identifier number for this profile set. This value can be set from 1 to 6. Profile Name Enter a profile name for the profile created. Select ACL Type Select profile based on Ethernet (MAC Address), IPv4 address, IPv6 address, or packet content. This will change the window according to the requirements for the type of profile. Select Ethernet ACL to instruct the Switch to examine the layer 2 part of each packet header. Select IPv4 ACL to instruct the Switch to examine the IPv4 address in each frame's header. Select IPv6 ACL to instruct the Switch to examine the IPv6 address in each frame's header. Select Packet Content to instruct the Switch to examine the packet content in each frame's header. Source MAC Mask Enter a MAC address mask for the source MAC address, e.g. FF-FF-FF-FF-FF-FF. Destination MAC Mask Enter a MAC address mask for the destination MAC address, e.g. FF-FF-FF-FF-FFFF. 802.1Q VLAN Selecting this option instructs the Switch to examine the 802.1Q VLAN identifier of each packet header and use this as the full or partial criterion for forwarding. 802.1p Selecting this option instructs the Switch to examine the 802.1p priority value of each packet header and use this as the, or part of the criterion for forwarding. Ethernet Type Selecting this option instructs the Switch to examine the Ethernet type value in each frame's header. Click the Select button to select an ACL type. Click the Create button to create a profile. Click the