Epson ActionLaser User Manual - Page 160
the cartridge and reinsert it. Turn the power back on and resend
View all Epson ActionLaser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Error Messages ERROR 22 The buffer has overflowed due to a communication protocol error. Make sure that your SelecType settings match the communication protocol settings of your computer. If the problem persists, call the toll-free number for a Customer Care Center referral. ERROR 40 A parity or baud rate error has occurred. Press the CONTINUE/RESET button to clear the error. Make sure your SelecType settings match your computer configuration. If the problem persists, call the toll-free number for a Customer Care Center referral. FONT CART ERROR The font cartridge selected using the FONT SOURCE SelecType option is not installed properly. Turn the power off. Then remove the cartridge and reinsert it. Turn the power back on and resend the print job. If the problem persists, make sure that the correct FONT SOURCE option has been selected in SelecType. See the section on SelecType in Chapter 3 for details. INSERTION ERROR There is a paper feeding problem. See the section on paper jams in this chapter for details. PAPER EMPTY There is no paper in the paper cassette, or the paper cassette is not installed properly. Load more paper into the paper cassette or properly install the cassette. See Chapter 4 for details. PAPER JAM Paper is jammed inside the printer. See the section on paper jams in this chapter. 7-4 Troubleshooting