Epson ActionLaser User Manual - Page 26
on the orange-colored fuser on the left side of your printer., operation, the fuser becomes very hot.
View all Epson ActionLaser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Assembling the Printer 1. Raise the top cover of your printer by lifting up on the latch. 2. Remove the basket and place it on a flat surface. 3. Locate the cleaning pad in the accessory pack. Holding the green felt tabs on the cleaning pad, insert the pad into the indentation on the orange-colored fuser on the left side of your printer. WARNING: Never touch the fuser. When the printer is in operation, the fuser becomes very hot. 1-12 Setting Up the Printer
Assembling the Printer
1.
Raise the top cover of your printer by lifting up on the latch.
2.
Remove the basket and place it on a flat surface.
3.
Locate the cleaning pad in the accessory pack. Holding the green
felt tabs on the cleaning pad, insert the pad into the indentation
on the orange-colored fuser on the left side of your printer.
WARNING:
Never touch the fuser. When the printer is in
operation, the fuser becomes very hot.
1-12
Setting Up the Printer