Epson ActionLaser User Manual - Page 37
Attaching the power cord, Setting the paper feed mechanism, just transported the printer
View all Epson ActionLaser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Assembling the Printer Attaching the power cord 1. Before attaching the power cord, make sure that the power switch on the left side of the printer is turned off. (It is off when the O side of the switch is pushed down.) 2. Attach the power cord to the socket at the back of the printer, as shown below. Then plug the other end of the power cord into a properly grounded outlet. Note: Do not connect the printer to your computer until the next chapter. Setting the paper feed mechanism Follow the steps below if you are using the printer for the first time or if you have just transported the printer: 1. Be sure the printer is turned off; then remove the paper cassette. 2. Turn on the power by pressing the side of the power switch marked with the vertical bar. The power indicator lights and a PAPER EMPTY message appears. Setting Up the Printer 1-23