Epson ActionLaser User Manual - Page 204
DIP switches, Technical Specifications
View all Epson ActionLaser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
Interface Specifications DIP switches Select the required serial interface by setting the DIP switches on the back of the printer as follows: RS-232C RS-422A 1 2 3 4 5 6 7 8 OFF OFF OFF OFF * OFF O F F O N OFF OFF OFF OFF OFF ON ON OFF * If DIP switch 5 is turned ON when the RS-232C serial interface is in use, pin 25 on the connector is set to +5V; if the DIP switch is turned OFF, the pin on the connector is not used. B-14 Technical Specifications
Interface Specifications
DIP switches
Select the required serial interface by setting the DIP switches on the
back of the printer as follows:
1
2
3
4
5
6
7
8
RS-232C
OFF
OFF
OFF
OFF
*
OFF
OFF ON
RS-422A
OFF
OFF
OFF
OFF
OFF
ON
ON
OFF
* If DIP switch 5 is turned ON when the RS-232C serial interface is in use, pin
25 on the connector is set to +5V; if the DIP switch is turned OFF, the pin on
the connector is not used.
B-14
Technical Specifications