Epson ActionLaser User Manual - Page 40
Testing the Printer, Turning on the power, Note: You, Testing and Connecting Your Printer
View all Epson ActionLaser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Testing the Printer The laser printer has three built-in print tests: the self test, font print test, and status print test. These tests let you check the operation of your printer and obtain information on printer status. It is recommended that you run the self test before you begin using your printer to make sure the printer is operating correctly. This test is also useful for checking the print density setting on your printer. The other two tests, the font print test and status print test, can be run any time you need information on fonts or printer status. Before running any of these tests, make sure you have removed all protective materials from the printer and that you have installed all components as described in Chapter 1. Note: You do not need to connect the printer to your computer before running these tests. (Connecting your printer to your computer is described later in this chapter.) Before performing these tests, it is necessary to turn on the power and load paper as described below. Turning on the power 1. Make sure the printer is plugged in. 2. Turn on the power by pressing the side of the power switch marked with the vertical bar. 2-2 Testing and Connecting Your Printer