HP 6125G HP 6125G & 6125G/XG Blade Switches Security Configuration Gui - Page 199
and the authentication method as, and set the user command privilege level to 3
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
# Generate the RSA key pairs. system-view [Switch] public-key local create rsa The range of public key size is (512 ~ 2048). NOTES: If the key modulus is greater than 512, It will take a few minutes. Press CTRL+C to abort. Input the bits of the modulus[default = 1024]: Generating Keys # Generate a DSA key pair. [Switch] public-key local create dsa The range of public key size is (512 ~ 2048). NOTES: If the key modulus is greater than 512, It will take a few minutes. Press CTRL+C to abort. Input the bits of the modulus[default = 1024]: Generating Keys # Enable the SSH server. [Switch] ssh server enable # Configure an IP address for VLAN-interface 1. This address will serve as the destination of the SSH connection. [Switch] interface vlan-interface 1 [Switch-Vlan-interface1] ip address 192.168.1.40 255.255.255.0 [Switch-Vlan-interface1] quit # Set the authentication mode for the user interfaces to AAA. [Switch] user-interface vty 0 7 [Switch-ui-vty0-7] authentication-mode scheme # Enable the user interfaces to support SSH. [Switch-ui-vty0-7] protocol inbound ssh [Switch-ui-vty0-7] quit # Create local user client001, and set the user command privilege level to 3 [Switch] local-user client001 [Switch-luser-client001] password simple aabbcc [Switch-luser-client001] service-type ssh [Switch-luser-client001] authorization-attribute level 3 [Switch-luser-client001] quit # Specify the service type for user client001 as stelnet, and the authentication method as password. This step is optional. [Switch] ssh user client001 service-type stelnet authentication-type password 2. Establish a connection between the SSH client and the SSH server: 189