HP 6125G HP 6125G & 6125G/XG Blade Switches Security Configuration Gui - Page 71

Login authentication Username:test@bbb Password: ? User view commands: display Display current system information ping Ping function quit Exit from current command view ssh2 Establish a secure shell client connection super Set the current user priority level telnet Establish one TELNET connection tracert Trace route function When switching to user privilege level 3, the Telnet user only needs to enter password enabpass as prompted. super 3 Password: User privilege level is 3, and only those commands can be used whose level is equal or less than this. Privilege note: 0-VISIT, 1-MONITOR, 2-SYSTEM, 3-MANAGE If the HWTACACS server is not available, the Telnet user needs to enter password 654321 as prompted for local authentication. super 3 Password: Å Enter the password for HWTACACS privilege level switch authentication Error: Invalid configuration or no response from the authentication server. Info: Change authentication mode to local. Password: Å Enter the password for local privilege level switch authentication User privilege level is 3, and only those commands can be used whose level is equal or less than this. Privilege note: 0-VISIT, 1-MONITOR, 2-SYSTEM, 3-MANAGE RADIUS authentication and authorization for Telnet users by a switch Network requirements As shown in Figure 22, configure Switch B to act as a RADIUS server to provide authentication and authorization for the Telnet user on port 1645. Configure Switch A to use the RADIUS server for Telnet user authentication and authorization, and to remove the domain name in a username sent to the server. Set the shared keys for secure communication between the NAS and the RADIUS server to abc. 61