HP 6125G HP 6125G & 6125G/XG Blade Switches Security Configuration Gui - Page 206
Set the authentication mode for the user interfaces to AAA.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
[SwitchB] public-key local create rsa The range of public key size is (512 ~ 2048). NOTES: If the key modulus is greater than 512, It will take a few minutes. Press CTRL+C to abort. Input the bits of the modulus[default = 1024]: Generating Keys # Generate a DSA key pair. [SwitchB] public-key local create dsa The range of public key size is (512 ~ 2048). NOTES: If the key modulus is greater than 512, It will take a few minutes. Press CTRL+C to abort. Input the bits of the modulus[default = 1024]: Generating Keys # Enable the SSH server. [SwitchB] ssh server enable # Configure an IP address for VLAN-interface 1, which the SSH client will use as the destination for SSH connection. [SwitchB] interface vlan-interface 1 [SwitchB-Vlan-interface1] ip address 10.165.87.136 255.255.255.0 [SwitchB-Vlan-interface1] quit # Set the authentication mode for the user interfaces to AAA. [SwitchB] user-interface vty 0 7 [SwitchB-ui-vty0-7] authentication-mode scheme # Enable the user interfaces to support SSH. [SwitchB-ui-vty0-7] protocol inbound ssh [SwitchB-ui-vty0-7] quit # Create local user client001. [SwitchB] local-user client001 [SwitchB-luser-client001] password simple aabbcc [SwitchB-luser-client001] service-type ssh [SwitchB-luser-client001] authorization-attribute level 3 [SwitchB-luser-client001] quit # Specify the service type for user client001 as stelnet, and the authentication method as password. This step is optional. [SwitchB] ssh user client001 service-type stelnet authentication-type password 2. Establish a connection between the SSH client and the SSH server: # Configure an IP address for VLAN-interface 1. system-view [SwitchA] interface vlan-interface 1 196