HP Neoware c50 TeemTalk® 5.0 for Unix User's Guide - Page 110
Serial Port, Transmit Rate, Use RS232 Port Connection, dev/ttya, Parity
View all HP Neoware c50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Setup Menus Serial Port Factory default: Unspecified This option specifies the name of the serial port device which will be used for host communications when the Use Serial Port option is selected. Click the pointer on the line then enter the name of the device, for example: Sun: /dev/ttya HP: /dev/tty0 VAX: TTA0: If an invalid device is specified, or the device cannot be accessed, communication will be defaulted back to the operating system shell. Transmit Rate Factory default: 19200 The numeric value of this option specifies the maximum effective baud rate that TeemTalk transmits at. This is used to artificially reduce data rates on higher baud rate interfaces. Use RS232 Port Connection Factory default: Unselected The setting of this option determines whether TeemTalk will communicate with the operating system shell, or the host via a serial port. When unselected, TeemTalk will communicate with the operating system shell. The Parity setting is used to determine the number of data bits. The other options in this dialog box do not apply. When selected, host communications will be made via the serial port device specified by the Serial Port option using the communications format specified in this dialog box. 8-36