HP Neoware c50 TeemTalk® 5.0 for Unix User's Guide - Page 274
Retry Delay, Timeout, Max Retries, Packet Depth, Primary Extent, Secondary Extent
View all HP Neoware c50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 274 highlights
File Transfer Retry Delay Factory default: 0 This specifies the period of time in milliseconds that the protocol will wait for a packet to be transferred before trying again. The protocol will be exited if the number of retries exceeds that specified by the Max Retries option. The valid range is 0 - 65535. Timeout Factory default: 10000 This specifies the length of time in milliseconds that the protocol will wait for a response from the remote host before generating an error message. The valid range is 1 - 65535. Max Retries Factory default: 5 This setting specifies the maximum number of retries that will be performed before the protocol is exited. The valid range is 0 - 65535. Packet Depth Factory default: 3 This specifies the number of packets to send or receive before requiring acknowledgement. The valid range is 1 - 16. Primary Extent Factory default: 4 This sets the primary file extent for the file created on the host. The valid range is 1 32767. Secondary Extent Factory default: 16 This sets the secondary file extent for the file created on the host. The valid range is 1 - 32767. 22-16