HP Neoware c50 TeemTalk® 5.0 for Unix User's Guide - Page 247

TA6530 Emulation 20 TA6530 Emulation This chapter describes the Tandem 6530 terminal emulation. Introduction The emulation of the Tandem 6530 terminal is entered by displaying the Emulation Settings dialog box from the Settings menu and setting the Alpha Emulation option to TA6530. Click Ok to close the dialog box. You must use the inbuilt telnet facility provided by TeemTalk to make a connection to a remote host when using this mode. Refer to the Initiating A Telnet Session section in the Getting Started chapter for details. The TA6530 emulation is configured via the TA6530 Settings dialog box which is described in the Setup Menus chapter. Colour mapping of attributes (local and by host) and enhanced colour field support for Block mode are supported. The following sections describe the status line displayed at the bottom of the window, the three main operating modes (Conversational, Block and ANSI), and the mapping of functions on various keyboard layouts. The Status Line The last (25th) line in the window is used to display messages and status information. You can enable or disable display of a border which separates this line from the rest of the lines above it by setting the Status Border option in the TA6530 Settings dialog box accordingly. The status line is divided into two fields. The first and leftmost field is used to display messages of up to 64 characters in length. The second field displays the current operating status and will usually display at least one of the following status indicators: 20-1