HP Neoware c50 TeemTalk® 5.0 for Unix User's Guide - Page 37

Getting Started other options in this dialog box only apply if TeemTalk is to communicate with a host via an RS232 serial port. If TeemTalk is to communicate to a host via the serial port, you must set the baud rate, stop bits, parity and flow protocol to match that of the host to which you will be communicating. The Transmit Rate option enables you to specify the maximum effective baud rate that TeemTalk transmits at. This is used to artificially reduce data rates on higher baud rate interfaces. When the options are set correctly, click Ok to make the changes take effect and close the dialog box. To save the settings so that they will be automatically reasserted when TeemTalk is subsequently reset or loaded, display the File menu and select the Save Settings option. 3-5