HP Neoware c50 TeemTalk® 5.0 for Unix User's Guide - Page 263

File Transfer Receiving Files The following procedure is used to transfer files from the host to your workstation. 1. Start the transfer procedure on the host computer and specify that files are to be sent. 2. Display the TeemTalk File menu on your workstation and select File Transfer... The Initiate File Transfer dialog box will be displayed (as shown in the previous section). 3. Select the Transfer Protocol that you wish to use. 4. If you wish to change the default parameter settings for the chosen transfer protocol, click the relevant Parameters button and make your selections in the displayed dialog box then click OK. See the following sections for details. Note: If the file transfer fails it is probably because of differences between the local and remote parity and the word size. 5. If you wish to specify a different local directory for received files, click the Local button and specify the local directory path in the Local Change Directory dialog box, then click OK. 6. Click the Receive button in the Initiate File Transfer dialog box. Note: The program will wait for the arrival of one or more files from the host. 7. Click the Start button. If you selected the XMODEM or XMODEM-1K protocol, a dialog box will be displayed in which you specify the name of the file to be received. All the other protocols do not require this as the filename is provided by the sender. When the transfer begins, a window will be displayed indicating the status of the file transfer. On completion of the transfer, or if the transfer is cancelled, an audible tone will sound and appropriate messages will be displayed. Note: With XMODEM, YMODEM Batch and ZMODEM, you can use the Remote Command option in the ZModem Parameters dialog box to automatically start the host end. 22-5