HP Neoware c50 TeemTalk® 5.0 for Unix User's Guide - Page 309

Resources & Command Line Options Closed Telnet Session Exits TeemTalk Resource: xteemx340*tnExit: on Command Line: -tnexit Default Setting: off (message box displayed) When a telnet session is closed, TeemTalk normally displays a message box giving you the option to reconnect, cancel or exit. These commands enable you to cause TeemTalk to be exited immediately when the telnet session is closed. See the Telnet Close Option section also. Suppress Telnet Echo Option Resource: xteemx340*telnetSuppressEcho: on Command Line: -tnsuppressecho Default Setting: off This command will suppress TeemTalk generation of the telnet echo option on connection. Suppress Telnet 3270 Regime Option Resource: xteemx340*telnetSuppressRegime: on Command Line: -tnsuppressregime Default Setting: off This command will suppress TeemTalk support for the telnet "3270 regime" option. Telnet Close Option Resource: xteemx340*tnClose: 0-3 Command Line: -tnclose 0-3 Default Setting: 0 This command specifies the action to be taken when a telnet session is closed (if -tnexit is not specified). The possible settings are as follows: 0 Display message box for option required. 1 Exit TeemTalk. 2 Reconnect automatically to the same host. 3 Cancel telnet connection only. This will also be effective for telnet connection failure. 25-17