HP Neoware c50 TeemTalk® 5.0 for Unix User's Guide - Page 269

ZMODEM Parameters File Transfer Clicking the ZModem... button in the Initiate File Transfer dialog box will cause the ZModem Parameters dialog box to be displayed, as shown above. This enables you to set parameters specific to the ZMODEM protocol. The Outbound settings inform the remote end how to treat the data that will be sent to it. The Inbound settings will override any Outbound settings specified at the remote end. The zmodemStartup resource or -zm command line option can be used to make TeemTalk check incoming data for a remote ZMODEM startup sequence then automatically start a file transfer using the settings specified in this dialog box. Note that the transfer protocol selected in the Initiate File Transfer dialog box will be ignored. Data Conversion Factory default: None This specifies whether or not the file being transferred is converted to ASCII or Binary format at the receiving end, or remains unchanged (None). The Resume option enables you to send the remainder of a file if the transfer process is interrupted, for example if data blocks were missed or the connection was lost. This saves you having to retransmit the entire file again. 22-11