HP Neoware c50 TeemTalk® 5.0 for Unix User's Guide - Page 89

Setup Menus When you achieve a TN3270E connection, the LU device name that you are connected as will be displayed on the status line. If the specified device is rejected by the server or host, then an error message box will be displayed indicating the reason. Associate This is available when the Model option in the IBM 3270 Settings dialog box is set to 3287-1 (a printer). It is used to request that the device name of the printer associated with a particular terminal is assigned to this Telnet session. The name of the terminal is specified here. (This is implemented as described in RFC 1647.) TN3270E Options TN3270E in implemented as described in RFC 1647. These options should not be changed unless required by your System Administrator. The Bind setting determines whether or not the server is allowed to send the SNA Bind image and Unbind notification to the emulator. When Responses is selected, positive and negative response handling is supported. It allows the server to reflect to the emulator any and all definite, exception, and no response requests sent by the host application. When SysReq is selected, some (or all, depending on the server) of the functions of the SysReq key will be emulated and the server in an SNA environment. The LU1 and LU3 Printer options are available when the Model option in the IBM 3270 Settings dialog box is set to 3287-1 (a printer). They enable you to specify which printer type(s) to support. Seconds Before Print Close Factory default: 0 The setting of this option determines when TeemTalk completes a print job. When set to 0, TeemTalk will not start printing until it receives a 'print end of job' command from the host. Entering any other number will cause TeemTalk to print after the specified number of seconds have elapsed, regardless of whether or not the 'print end of job' command has been received from the host. 8-15