HP Surestore 64 fw 05.01.00 and sw 07.01.00 - Director Product Manager - User
HP Surestore 64 - Director Switch Manual
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Surestore 64 manual content summary:
- HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 1
V05.01.00-24/HAFM SW V07.01.00-09 Second Edition June 2003 Part Number: AA-RTDUB-TE This guide provides an introduction and overview of the HP StorageWorks Director 2/64 Product Manager and Director 2/140 Product Manager. It also explains how to use Product Manager features to monitor, manage, and - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 2
the express limited warranty statements for such products. Nothing herein should be construed as constituting an additional warranty. Printed in the U.S.A. Director Product Manager User Guide Second Edition June 2003 Part Number: AA-RTDUB-TE - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 3
15 Text Symbols 15 Equipment Symbols 16 Rack Stability 18 Getting Help 19 HP Technical Support 19 HP Storage Website 19 HP Authorized Reseller 19 1 Product Manager Overview 21 Managing the StorageWorks Director 2/64 and Director 2/140 22 HAFM Management Menu Options 23 HAFM 23 View Tabs - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 4
29 Using the Product Manager 32 Using Dialog Boxes 32 Keyboard Navigation 32 Illustrations Used in This Manual 32 Logging in to the HAFM Application 32 Opening the Product Manager 34 Window Layout and Function View 57 Closing the Product Manager 59 4 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 5
for Specific Functions 61 Backing Up and Restoring Product Manager Data 64 Restoring Data to the HAFM server 65 Using the Backup Application 65 2 Monitoring and Managing the Director 67 Hardware View Port Menu 89 Port Properties 89 Node Properties 90 Director Product Manager User Guide 5 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 6
Statistics 108 Operational Statistics 110 Traffic Statistics with Receive and Transmit Values 110 Troubleshooting Tips 111 Button Functions 111 Port Operational States 112 Link Incident Alerts 115 Parameters 119 Switch Parameters 120 Domain ID 120 6 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 7
RSCN's on zone set activations 122 Director Speed (Director 2/64 Only 122 Management Style 123 Configuring Fabric Parameters 124 Fabric Director Date and Time 146 Setting Date and Time Manually 146 Synchronizing Date and Time 147 Configuring Threshold Alerts Product Manager User Guide 7 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 8
Versions 178 Enable E-Mail Notification 178 Enable Call-Home Notification 179 Notes 179 Backup and Restore Configuration 180 Reset Configuration 182 6 Optional Features 185 FICON Management Server 190 Enable/Disable and Online State Functions 191 8 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 9
Figures 1 Typical network configuration 31 2 HAFM application icon 33 3 Main HAFM window 34 4 StorageWorks Director 2/64 and Director 2/140 icons 35 5 StorageWorks Director 2/64 Product Manager window 35 6 StorageWorks Director 2/140 Product Manager window 36 7 Hardware View 50 8 Port Card - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 10
Date and Time Periodic Synchronization dialog box 80 19 Configure date and time (manually 80 20 Set Online State dialog box (Online 81 21 Switchover CTP dialog box 118 32 Configure Switch Parameters dialog box (Director 2/64 119 33 Configure Switch Parameters dialog box (Director 2/140 Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 11
Ports dialog box 174 59 IPL Confirmation dialog box 176 60 Backup and Restore Configuration dialog box 180 61 Configure FICON Management Server box 189 63 Switch Binding State Change dialog box 192 64 Switch Binding Membership List dialog box 194 65 Configure Open Product Manager User Guide 11 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 12
Contents 12 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 13
to acquire and install one or more of the following Hewlett-Packard (HP) StorageWorks products: About this Guide ■ Director 2/64 ■ Director 2/140 ■ High Availability Fabric Manager (HAFM) application The Director 2/64 is a 64-port director, while the Director 2/140 is a 140-port director - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 14
About this Guide Overview This section covers the following topics: ■ Intended Audience ■ Related Documentation information, documentation, and firmware releases, please visit the HP StorageWorks website: http://h18006.www1.hp.com/storage/saninfrastructure.html For information about Fibre Channel - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 15
font unless they are case sensitive Blue, underlined sans serif font text: http://www.hp.com Text Symbols The following symbols may be found in the text of this guide. They have the following meanings. WARNING: Text set off in this manner indicates that failure to follow - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 16
following equipment symbols may be found on hardware for which this guide pertains. They have the following meanings. Any enclosed surface or the presence of electrical shock hazards. Enclosed area contains no operator serviceable parts. WARNING: To reduce the risk of personal injury from electrical - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 17
About this Guide Power supplies or systems marked with these symbols indicate the presence of multiple sources of power injury or damage to the equipment, observe local occupational health and safety requirements and guidelines for manually handling material. Director Product Manager User Guide 17 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 18
About this Guide Rack Stability Rack stability protects personnel and equipment. WARNING: To reduce the risk of personal injury or damage to the equipment, be sure time. A rack may become unstable if more than one rack component is extended for any reason. 18 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 19
still have a question after reading this guide, contact an HP authorized service provider or access our website: http://www.hp.com. HP Technical Support Telephone numbers for worldwide technical support are listed on the following HP website: http://www.hp.com/support/. From this website, select the - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 20
About this Guide 20 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 21
Product Manager Overview 1 1 This chapter provides an introduction and overview of the HP StorageWorks Director 2/64 Product Manager and Director 2/140 Product Manager. It is intended as a quick reference for using features available through the main Product Manager window. Director Product - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 22
the HAFM on remote workstations using any standard web browser. For instructions, refer to the appropriate appendix that pertains to the operating system for your workstation in the HP StorageWorks HA-Fabric Manager User Guide. ■ The Embedded Web Server (EWS) interface. Using a browser-capable PC - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 23
Management Menu Options This user's guide provides information on the StorageWorks Director 2/64 Product Manager and Director 2/140 Product Manager application only. Information on the HAFM application is provided in the HP StorageWorks HA-Fabric Manager User Guide. Following are lists of options - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 24
ISL Alerts ■ Clear All ISL Alerts ■ Enable Fly Over Display Configure Menu ■ Users ■ Nicknames ■ Sessions ■ SNMP Agent ■ Activate Zone Set 24 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 25
options available through the Product Manager application for your director. For more information on these options, refer to "Configure Menu" on page 39 in this manual. Director Product Manager User Guide 25 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 26
Management Style only) - Clear Link Incidents Alert(s) - Reset Port - Port Binding - Clear Threshold Alert(s) - Display Options (Nickname and Worldwide Name) 26 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 27
SANtegrity Binding is installed) ■ Ports ■ Addresses (FICON Management Style only) - Active - Stored ■ SNMP Agent ■ Management Server ■ Features ■ Date/Time ■ Threshold Alerts Director Product Manager User Guide 27 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 28
■ Swap Ports (FICON Management Style only) ■ Data Collection ■ IPL ■ Set Online State ■ Firmware Library ■ Configure Enable E-Mail Notification ■ Configure Enable Call Home ■ Backup and Restore Configuration ■ Reset Configuration Help Menu ■ Contents ■ About 28 Director Product Manager User - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 29
Product Manager Overview Product Manager Description The Product Manager for the HP StorageWorks Director 2/64 and Director 2/140 has a Java-based graphical user interface (GUI) that provides Open Trunking if optional Open Trunking feature is installed. Director Product Manager User Guide 29 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 30
FICON functions. ■ Configure the data speed for the director (Director 2/64 only) and for individual ports. ■ Configure threshold alerts for ports. the call-home feature, accessing the director logs, and collecting data to support failure analysis. ■ Reset port operation. ■ Run port diagnostics. ■ - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 31
Topology View. Figure 1 illustrates director management components on a public network. The figure shows the following elements: 1 Two Director 2/64s 2 HP Ethernet hub 3 HAFM server (laptop or rack mount) 4 Remote user workstation Figure 1: Typical network configuration Director Product Manager - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 32
general overview of the StorageWorks Director 2/64 and Director 2/140 Product Manager application specific dialog boxes, refer to the appropriate chapters in this guide. Using Dialog Boxes Buttons, such as OK, Activate, support standard keyboard navigation. Illustrations Used in This Manual - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 33
instructions, refer to the appropriate appendix that pertains to the operating system for your workstation in the HP StorageWorks HA-Fabric Manager User Guide on a remote workstation running the HAFM application remote client software. Figure 2: HAFM application icon The HAFM login dialog box - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 34
icon in the Product View or right-click the icon and choose Open. The Director icons are shown in Figure 4. 34 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 35
4: StorageWorks Director 2/64 and Director 2/140 icons The Product Manager displays showing the default Hardware View. Refer to Figure 5 for the Director 2/64 and to Figure 6 for the Director 2/140. Figure 5: StorageWorks Director 2/64 Product Manager window Director Product Manager User Guide 35 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 36
, view panel, and status bar. Use features in these panels to configure director operation, monitor performance, and access maintenance features. 36 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 37
port bar graph in those views. For detail on these options refer to "Using the Port Card View" on page 84. Director Product Manager User Guide 37 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 38
the illustration in the Hardware View, away from a hardware component. Close Choose this option to close the Product Manager window. 38 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 39
state change notifications (RSCNs). In addition, you can also set the director data speed (Director 2/64 only). The director must be offline to configure director speed and preferred domain ID. ■ Fabric be offline to configure any fabric operating parameter. Director Product Manager User Guide 39 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 40
director is connected. In both modes, you can enable the rerouting delay feature and for the Director 2/64, you can set the director data speed. Note: Your director model and firmware may not allow variable data and allowed connection attributes for a port. 40 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 41
Synchronization check box is not checked, you can set the date and time in the dialog box fields manually. ■ Threshold Alerts-Choose this option to configure threshold alerts for ports. A threshold alert notifies users exist before an alert is generated. Director Product Manager User Guide 41 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 42
and port problems. Each entry includes the date and time of the event, a reason code for the event, the severity level, a brief description, and up to 32 bytes of supplementary event data. Refer to the HP StorageWorks Director 2/64 Service Manual or HP StorageWorks Director 2/140 Service Manual for - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 43
box. Use this dialog box to collect maintenance data into a file. This file is used by support personnel to diagnose system problems. Refer to the HP StorageWorks Director 2/64 Service Manual or HP StorageWorks Director 2/140 Service Manual for instructions. Director Product Manager User Guide 43 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 44
Service software. This service is offered at no additional charge for subsystems covered under an on-site warranty or on-site storage hardware support contract. To register or order Proactive Service software, contact your HP customer service representative. 44 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 45
Only a single copy of the configuration is kept on the server. This backup is primarily for single-CTP systems, where a backup is needed to restore the configuration data to a replacement CTP card. You for the Product Manager and copyright information. Director Product Manager User Guide 45 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 46
colored status symbols displayed in the graphics. Refer to Figure 5 for an example of the Director 2/64 Hardware View and Figure 6 for an example of the Director 2/140 Hardware View. For additional information view, refer to "Performance View" on page 105. 46 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 47
Symbol Alert Panel Green Circle Director Status Table Text Fully Operational Meaning All components and installed ports are operational; no failures. Director Product Manager User Guide 47 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 48
Operational Meaning A redundant component has failed, such as a power supply, and the backup component has taken over operation. A failure occurred which has decreased the director operational ability ■ Both SBAR cards fail. ■ All installed port cards fail. 48 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 49
established or if the CTP fails. Refer to "No Link Status" on page 70 for details on the status table text. Director Product Manager User Guide 49 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 50
the reasons they display in the Hardware View or Port List View, refer to "Monitoring Hardware Operation" on page 71. 50 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 51
available when you click the port card and choose the FRU secondary menu from the Product menu on the menu bar. Director Product Manager User Guide 51 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 52
a port card and choose Port Card View from the menu to display the Port Card View for that port (Figure 8). 52 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 53
Style only), Swap Ports (FICON Management Style only), Clear Link Incident Alerts, Reset Port, Port Binding, and Clear Threshold Alerts options. Director Product Manager User Guide 53 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 54
status condition displays in the main panel. Figure 9 shows an example of the Port List View. Figure 9: Port List View 54 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 55
in the main panel. All data is dynamic and updates automatically. Figure 10 shows an example of the FRU List View. Director Product Manager User Guide 55 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 56
is attached, the port's address, unit type, WWN of the attached node's port, and BB_Credit used by the attached node. 56 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 57
for each port. This information updates every five seconds. Each bar graph also shows the percentage link utilization for the port. A Director Product Manager User Guide 57 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 58
you right-click a port in the Port Card View or right-click a row in the Port List View. These include: 58 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 59
page 105. Closing the Product Manager To close the Product Manager, choose Close from the Product menu on the menu bar. Director Product Manager User Guide 59 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 60
has view rights only while operating in the HAFM application. Detailed instructions concerning the assignment of user rights for the HAFM and Product Manager applications display in Chapter 5 of the HP StorageWorks HA-Fabric Manager User Guide. There are five levels of access or "user rights" that - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 61
not authorized. Table 3: User Rights for Product Manager Product Manager Rights Backup and Restore Configuration Channel Wrap (FICON management style) Clear Audit Log Clear X X X X X X X X X X X X X X Operator X X X X Maintenance X X X X X X X Director Product Manager User Guide 61 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 62
Server Export Configuration Report FRU Beaconing FRU Switchover IPL Manage Firmware Modify Port Binding Port Diagnostics Product Administrator X Operator X X X X X X X X X X X X X X X X X X X Maintenance X X X X X X X X 62 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 63
Firmware View Hardware Log View LIN Log View Open Trunking Log View SNMP View Threshold Alert Log Product Administrator X X X X X X X X X X X X X Operator X X X X X X X X X Maintenance X X X X X X X X X X X X X X Director Product Manager User Guide 63 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 64
HAFM platform. Note: To ensure trouble-free backups; it is imperative that you leave the backup media in the drive at all times. Removing the media during a backup or restore can corrupt the database (all zone sets and zone definitions). ■ Firmware library. 64 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 65
HAFM server To restore data to the HAFM server, copy the: HafmData directory from the backup media to: C:\hafmdata on the C drive. Using the Backup Application For information on using the backup application, refer to the HP StorageWorks HA-Fabric Manager User Guide. Director Product Manager User - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 66
Product Manager Overview 66 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 67
options, and dialog boxes available through the Hardware View, Port List View, FRU List View, Node List View, and Performance View. Director Product Manager User Guide 67 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 68
in the director. Components include: ■ Port cards. - The Director 2/64 contains up to 16 port cards, slot positions 15 through 0 (left slot positions 1 and 0 (left to right). ■ Power supply modules. - The Director 2/64 contains two modules in slot positions 1 and 0 (left to right). - The Director 2/ - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 69
right). ■ SBAR cards. - The Director 2/64 contains two SBARs in slot positions 1 (bottom) State" on page 177 for instructions. ■ Online-All unblocked ports State" on page 177 for instructions. Note that the director automatically problem reaching the online state. Director Product Manager User - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 70
. This state normally only happens briefly, unless there is a problem reaching the offline state. No Link Status If the Ethernet network the server are not at compatible software release levels. Update the HAFM application software version. ■ Duplicate Session-A link Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 71
descriptions of hardware status and states also display when you click components to display Properties dialog boxes. Figure 13 illustrates the Director 2/64 Hardware View and Figure 14 illustrates the Director 2/140 Hardware View with examples of symbols and simulated LED indicators that can help - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 72
unit beaconing indicators 6 Power supply failure indicator 7 Cooling fan module failure indicator 8 SBAR card beaconing indicator 9 SBAR failure indicator Figure 13: Monitoring hardware operation-Director 2/64 Hardware View 72 Director Product Manager User - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 73
-The yellow triangle status symbol ( ) indicates that the port card is in a degraded state. This could indicate a problem with an individual port, such as a link failure or service-required status. A yellow triangle could also indicate that a port is in beaconing state. Click the port card to open - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 74
this CTP card has become the active card. If both CTP cards are operational, no LEDs illuminates on the backup card, while the green LED illuminates on the active CTP card. ■ Power, system error, and unit beaconing Clear System Error Light from the menu. 74 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 75
diamond displays on a power supply with the amber Fault indicator illuminated, the power supply has failed. The backup power supply has taken over to supply DC voltage to the director. Note: A green indicator displays displays as either 1 Gb/sec or 2 Gb/sec. Director Product Manager User Guide 75 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 76
-click the director illustration, away from a hardware component, to display the Director Properties dialog box, as shown in Figure 17. 76 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 77
ID. This is set using the Configure Switch Parameters dialog box. ■ Active Domain ID. The actual domain ID assigned to the director. ■ Director Speed (Director 2/64 only). This is set using the Configure Switch Parameters dialog box and is either 1 Gb/sec or 2 Gb/sec. Director Product Manager User - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 78
Monitoring and Managing the Director Note: The director model and firmware may not support 2 Gb/sec data speeds. ■ Switch Binding. Enabled if the optional SANtegrity Binding features are installed and are no system errors (the system error light is off). 78 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 79
2/64 Service Manual or HP StorageWorks Director 2/140 Service Manual for details. Note: An IPL is not intended for ordinary or casual use and should be performed only when directed by your support periodic synchronization and clock alert mode are enabled. Director Product Manager User Guide 79 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 80
/Time Synchronization field is not selected. Refer to Figure 19. Enter the date and time, and then click Activate. Figure 19: Configure date and time (manually) Note: Use the range of 0 to 23 for hours. Use the range of 0 to 59 for minutes and seconds. 80 Director Product Manager User - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 81
the card. This causes the amber LED on the card to flash to help you locate the card in the unit. Director Product Manager User Guide 81 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 82
includes the FRU name, position (slot number in the backplane), state (active, backup, or failed), part number, serial number, and speed capability. ■ Beaconing- from the active card to the backup card. When switchover occurs, the green LED illuminates on the backup CTP card to indicate that it - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 83
(slot number in the backplane), state (active, backup, or failed), part number, and serial number. SBAR (slot number in the backplane), state (active, backup, or failed), part number, and serial number. to the backup card. When switchover occurs, the green LED illuminates on the backup SBAR card - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 84
is beaconing or running online diagnostics. 3 Four duplex LC connectors for attaching fiber optic cables. Figure 22: Port Card View 84 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 85
Properties dialog box. ■ Port Number-The physical port number. ■ Port Name-User-defined port name or description. Refer to "Configuring Ports" on page 127 for instructions. Director Product Manager User Guide 85 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 86
the port through the Configure Ports dialog box. Refer to "Configuring Ports" on page 127 for instructions. ■ LIN Alerts Configuration-This field indicates whether link incident (LIN) alerts are enabled or invalid attachment operating state has not occurred. 86 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 87
Switch Parameters" on page 119 for more information. - Incompatible zoning configurations. Refer to the HP StorageWorks HA-Fabric Manager User Guide and the HP StorageWorks Director 2/64 Service Manual for more information on zoning. - Build fabric protocol error. - No principal switch. A principal - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 88
is an HP switch configured HP switch at other end of the ISL. The cable is connected to a non-HP a hardware problem on a (there may be problem in the switch 64 only). The director data speed was set to 2 Gb/sec, but the port only supports Optics speed conflict (Director 2/64 only). The port data speed - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 89
tests on any port or all ports on the port card. Refer to the HP StorageWorks Director 2/64 Service Manual for instructions on using these diagnostics. Port Menu While in the Port Card View, right-click Port Information" on page 85 for more information. Director Product Manager User Guide 89 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 90
indicator ( ) displays below the port's connector in the Port Card View and on the port card in the Hardware View. 90 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 91
follow the detailed steps in the HP StorageWorks Director 2/64 Service Manual. Channel Wrap (FICON Management Style a port, no actions occur. Although you can manually clear link incidents, they may also be cleared , clearing the service required (amber) LED. The reset does not - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 92
option and enter a WWN or nickname (see the WWN next). Changes only take effect when you click the Activate button. 92 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 93
. This action also restarts the notification interval and the cumulative minutes for utilization % interval. Figure 25: Clear Threshold Alerts dialog box Director Product Manager User Guide 93 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 94
the director. All information is updated automatically. ■ #-The physical port number, from 0-63 on the Director 2/64, and 0-127 and 132-143 on the Director 2/140. Note that for the Director 2/140, ports 128 those addresses will be followed by an asterisk (*). 94 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 95
the Hardware View, see "Port Operational States" on page 112. - No Light - Online - Offline - Beaconing - Link Reset - Not Operational - Not Installed Director Product Manager User Guide 95 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 96
port's LED is beaconing. Blinking red and yellow diamonds display for port failures or for ports requiring service. Double-click the row to display the reason for the status in the Port Properties dialog box. Management Style only) ■ Clear Link Incident Alert 96 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 97
Monitoring and Managing the Director ■ Reset Port ■ Port Binding ■ Clear Threshold Alerts Note: For Node Properties, if a node is not logged in, a message displays indicating that node information is not available. Director Product Manager User Guide 97 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 98
displays information about all installed FRUs on the director. All data is dynamic and updates automatically as the software detects changes. Figure 27: FRU List View You can display the FRU Properties dialog box for FRU FRU acronyms are: - BKPLNE-Backplane. 98 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 99
are 0 and 1. The chassis positions for port cards are from 0-63 on the Director 2/64, and 0-127 and 132-143 on the Director 2/140. Note that for the Director 2/ connections. ■ Status-The FRU status (Active or Backup). ■ Part Number-The FRU part number. ■ Serial Number- The FRU serial number. - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 100
node includes: ■ Port #-The physical port number, from 0-63 on the Director 2/64, and 0-127 and 132-143 on the Director 2/140. Note that for the Director node's Fibre Channel address. ■ Unit Type-The following information, if supported, is supplied by the attached device: - Converter - Channel path - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 101
Hub - Integrated CTC adapter - Magnetic tape - Module - Other - Printer - Proxy-agent - Reserved - Software driver - Stand-alone CTC adapter - Storage device - Storage subsystem - Switch - Terminal (full screen) - , the nickname displays instead of the WWN. Director Product Manager User Guide 101 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 102
the menu bar. Note that if a node is not logged in, a message displays indicating that node information is not available. 102 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 103
Must be configured to display. ■ Unit Type-Provided by attached device, if supported. Refer to "Node Type" under "Node List View" on page 100. buffer-to-buffer credit that the attached node has available. ■ Class of Service-Class of service. This can be class 2, class 3, or both. ■ Data Field Size - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 104
when you right-click a port's row in the Port List View or on a port's bar graph in the Performance View. 104 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 105
the menu bar. Refer to "Port Menu" on page 89 for an explanation of these pop-up menu options. ■ Port Properties Director Product Manager User Guide 105 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 106
port's number and the WWN decoding. The Statistics Values tables contain cumulative port statistics and error statistics for transmit and 106 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 107
"Button Functions" on page 111. Note: There are not thresholds for these values. You may determine that a problem exists by the rate that the value changes. For example, BB_Credit starvation can occur if data is sent to by this F_Port to its attached N_Port. Director Product Manager User Guide 107 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 108
switch completes initialization or if the switch is servicing so many requests that it cannot process a is no cause for concern. If not, further troubleshooting may be necessary. There are no thresholds for correctly. Use this data to isolate problems with port and link operations. The Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 109
in 12 separate 1.5-second samples within five minutes, a bit-error threshold link incident is generated. ■ CRC errors end-of-frame (EOF) delimiter, or an invalid class of service. This indicates that the frame arrived at the director's port corrupted problem. Director Product Manager User Guide 109 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 110
of words that the port has received. ■ Four byte words Tx-The number of words that the port has transmitted. 110 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 111
that were rerouted from this ISL to another ISL due to congestion. Troubleshooting Tips As a general rule, you should clear all counts after the when errors accumulate to judge the presence and severity of a problem. Also, recognize that there is a link recovery hierarchy implemented in Guide 111 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 112
Configure Ports dialog box. Note: Ports can be configured as G_Ports, F_Ports, and E_Ports through the Configure Ports dialog box. 112 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 113
. The director port was configured as "Unblocked" and is receiving the Fibre Channel OLS indicating that the attached device is offline. Director Product Manager User Guide 113 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 114
Yellow Triangle On Blink Yellow Triangle Off Off None Description The director port has failed and requires service. The amber LED for the port remains illuminated. The E_Port is segmented preventing the two provides additional port function is not enabled. 114 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 115
like the loss of light, invalid sequences and other problems. When a problem occurs, a LIN alert is sent to the Link in the Hardware View and the alert description in the Port Properties dialog box manually, they may also be cleared by actions outside of your control: such Manager User Guide 115 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 116
in the Threshold Alert Log. For detailed procedures to configure threshold alerts, refer to "Configuring Threshold Alerts" on page 148. 116 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 117
Configuring the Director 3 3 This chapter describes how to use the options that display on the menu when you choose the Configure menu on the menu bar. Each of these options is explained in the following sections. Director Product Manager User Guide 117 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 118
should reflect the director's Ethernet network DNS host name. For example, if the DNS host name is SAN140.hp.com, the name entered in this dialog box is SAN140. b. Type a director description of 255 or fewer save the information and close the dialog box. 118 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 119
and Management Style parameters. Verify that the director is set offline. For instructions, refer to the "Setting Director Online State" on page 13. Caution: displays. Figure 32 displays the switch parameters for the Director 2/64 and Figure 33 displays the switch parameters for the Director 2/140 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 120
. 2. After you change settings, click the Activate button. 3. Set the director online. For instructions, see "Setting Director Online State" on page 81. Switch Parameters Configure the following parameters as E_Ports segment, causing the fabric to segment. 120 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 121
on domain ID, refer to the section on domain ID assignment for multiswitch fabrics in the HP StorageWorks SAN High Availability Planning Guide for details. Insistent This option is not supported unless the SANtegrity Binding feature is installed. Click the check box to remove or add a check - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 122
to determine if enabling Domain RSCNs will cause problems with your HBA or storage products. Note that will cause problems with your HBA or storage products. Director Speed (Director 2/64 Only) to 2 Gb/sec, all installed CTP cards must support 2 Gb/sec data speed or an error message displays stating - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 123
to 2 Gb/sec and the firmware only supports 1 Gb/sec, an error message displays stating that the feature is not supported and providing the firmware level that will support the higher speed. At the Director Speed field (non-FICON) Fibre Channel environments. Director Product Manager User Guide 123 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 124
RAM on the director. 1. Verify that the director is set offline. For instructions, refer to the "Setting Director Online State" on page 81. Caution: configuring the director. 6. Set the director online. For instructions, see "Setting Director Online State" on page 81. 124 Director Product Manager - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 125
Parameters Configure the following parameters as required by your fabric. BB_Credit Configure the director to support buffer-to-buffer credit (BB_Credit) from 1 through 60. This is the value used for If the value is not the same, the fabric segments. Director Product Manager User Guide 125 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 126
setting this value to something other than default, refer to the section on principal switch selection for multiswitch fabrics in the HP StorageWorks SAN High Availability Planning Guide for details. For example, in the audit log, you may notice that the Principal setting maps to a number code of - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 127
Fabric 1.0-Default. Choose this mode if the fabric contains HP directors and switches, as well as other open-fabric compliant #-You cannot edit this field. The physical port number, from 0-63 on the Director 2/64, and 0-127 and 132-143 on the Director 2/140. Note that for the Director User Guide 127 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 128
send broadcast traffic. When you choose this option, the port can support up to 60 buffer-to-buffer credits (BB_Credits) to handle link link incident (LIN) is a problem detected on a fiber optic link, such as the loss of light or invalid sequences. When a problem occurs, a LIN alert is sent Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 129
2 Gb/sec on ports that support this speed. If the port optics do not support 2 Gb/sec, a warning displays stating that the optical transceiver in the port does not support the data rate. - Do not Configure Operating Parameters dialog box (Director 2/64 only). Director Product Manager User Guide 129 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 130
listed will be logged off, and the ports will attach to the respective devices identified in the Bound WWN column. 130 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 131
Alerts-Clears all LIN Alert check boxes in the column. LIN alerts will be disabled for all ports on the switch. Director Product Manager User Guide 131 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 132
the attached device. Note: Your director model, firmware, and port cards may not allow 2 Gb/sec data speeds. ■ Bound WWN 132 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 133
. The Configure Ports dialog box displays, as shown in Figure 36. Figure 36: Configure Ports dialog box (Open Systems management style) Director Product Manager User Guide 133 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 134
Configuring the Director Ports are numbered from 0-63 on the Director 2/64, and 0-127 and 132-143 on the Director 2/140. Note that for the Director 2/140, ports 128-131 are to configure. 11. Click Activate to activate the changes and close the dialog box. 134 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 135
37. Figure 37: Configure Ports dialog box (FICON management style) Ports are numbered from 0-63 on the Director 2/64, and 0-127 and 132-143 on the Director 2/140. Note that for the Director 2/140, ports 128-131 a check mark displays, LIN alerts are enabled. Director Product Manager User Guide 135 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 136
offline sequences (OLS), but cannot communicate to an attached device. If the box is not checked, the port is unblocked. 136 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 137
override any other attribute. - Block all ports-Blocks communication between all ports. Ports that are blocked continuously transmit offline sequences (OLS). Director Product Manager User Guide 137 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 138
the menu bar, then choose Active. The Configure Addresses - "Active" dialog box displays. Figure 39: Configure Addresses - "Active" dialog box 138 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 139
menu on the menu bar, and then choose Stored. The Address Configuration Library dialog box displays, as shown in Figure 40. Director Product Manager User Guide 139 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 140
is enabled in through the Configure FICON Management Server dialog box (Configure menu), this overwrites the current IPL address configuration. 140 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 141
Note: For complete information on objects defined in MIBs and steps to download MIB variables to your SNMP workstation, refer to the HP StorageWorks CLI Reference Guide for Directors and Edge Switches. ■ Configure network addresses and community names for up to six SNMP trap recipients. An SNMP trap - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 142
name of the trap recipient (SNMP management workstation) in the associated Trap Recipient field. Use 64 or fewer alphanumeric characters. Hewlett-Packard recommends using the IP address. Figure 41: Configure SNMP dialog information and close the dialog box. 142 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 143
up the configuration data. For more information, refer to "Backup and Restore Configuration" on page 180. Configuring Open Systems it is assigned. The serial number used for configuring the feature key is the software readable serial number that can be obtained using the CLI, HAFM, SNMP, Guide 143 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 144
the features that are active are included in the new feature list. 4. Click Activate to activate the new feature key. 144 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 145
data. Note: Feature keys are automatically removed when a Director is reset to factory defaults. You must then reconfigure the feature keys. Director Product Manager User Guide 145 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 146
in Figure 44. 3. Set director date and time manually, or set for periodic updates. For specific instructions, see the following sections: ■ "Setting Date and Time Manually" on page 146 ■ "Synchronizing Date and Time 1 through 31 Year (YYYY): greater than 1980 146 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 147
the director, back up the configuration data. For more information, refer to "Backing Up and Restoring Configuration Data" on page 157. Director Product Manager User Guide 147 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 148
the Hardware View page, choose Configure > Threshold Alerts. The Configure Threshold Alerts dialog box displays, as shown in Figure 45. 148 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 149
. The New Threshold Alert dialog box displays, as shown in Figure 46. Figure 46: New Threshold Alerts dialog box-first screen Director Product Manager User Guide 149 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 150
Configuring the Director 3. Enter a name from one to 64 characters in length. All characters in the ISO Latin-1 character set, excluding control characters, are . When throughput reaches this percentage of port capacity, a threshold alert will occur. 150 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 151
each port number. 11. Click Next. A final screen displays to provide a summary of your alert configuration, as shown in Figure 49. Director Product Manager User Guide 151 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 152
click Activate. The alert is activated, as shown in Figure 50. Figure 50: Configure Threshold Alerts dialog box-alert activated 152 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 153
, choose Deactivate to change to the inactive state. If the alert is inactive, choose Activate to change to the active state. Director Product Manager User Guide 153 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 154
parameters as congestion thresholds for ports, event notification options, and low BB_Credit threshold, refer to "Open Trunking" on page 199. 154 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 155
Figure 51. 1 2 3 4 5 6 1 Details 2 List 3 Create new folder 4 Home 5 Go up one level 6 Drive list Figure 51: Export Configuration Report dialog box Director Product Manager User Guide 155 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 156
the EWS interface. When disabled, remote users cannot access the interface. For complete procedures on using EWS, refer to HP StorageWorks Embedded Web Server User Guide. Enabling Telnet Use the following steps to enable Telnet: 1. At the Hardware View, choose Configure > Enable Telnet. Choosing - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 157
all of the data you input through instructions in this chapter, using the Backup and Restore Configuration option. This option is page 64. Note: We do not recommend changing the default backup settings. Note: To ensure trouble-free backups, it is imperative that you leave the backup media in - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 158
Configuring the Director 158 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 159
Using Logs 4 4 This chapter describes the StorageWorks Director 2/64 and Director 2/140 logs. Access these logs from the logs menu on the menu bar: ■ Audit Log ■ Event Log ■ Hardware Log ■ Link Incident Log ■ Threshold Alert Log ■ Open Trunking Log Director Product Manager User Guide 159 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 160
log window to display the Save dialog box. This dialog box contains the following controls, as shown in Figure 52: 160 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 161
in descending order. An up arrow indicates sorting in ascending order. Click once to sort. Click again to reverse the sort. Director Product Manager User Guide 161 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 162
interface. - Fibre Channel Host-Change was made inband by a Fibre Channel host through the open systems or FICON management server. 162 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 163
" is the network address of the web user. - Fibre Channel Host-No entry displays. - Telnet-Change was made through a telnet connection. Director Product Manager User Guide 163 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 164
detailed information on event data and problem resolution, refer to the HP StorageWorks Director 2/64 Service Manual for the Director 2/64 and the HP StorageWorks Director 2/140 Service Manual for the Director 2/140. Each in this column for the port card: 164 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 165
chassis position. FRU acronyms are: - BKPLNE-backplane - CTP-CTP card - SBAR-SBAR card - Port-card - FAN-fan module - PWR-power supply Director Product Manager User Guide 165 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 166
format. For detailed information on event data and problem resolution, refer to the event code tables appendix in the HP StorageWorks Director 2/64 Service Manual for the Director 2/64 and the HP StorageWorks Director 2/140 Service Manual for the Director 2/140. 166 Director Product Manager - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 167
form factor optics (SFO) pluggable, FICON port module, 1 Gigabit - UPM-G_Port, small form factor optics (SFO) pluggable, universal port module, 2 Gigabit Director Product Manager User Guide 167 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 168
components installed. ■ Action-Inserted or removed. ■ Part Number-Part number of the component. ■ Serial Number-Serial number of the component. 168 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 169
to the log. - Implicit incident. The attached node detects a condition that may cause problems on the link. - Bit-error threshold exceeded. The number of code violation errors has exceeded threshold. - Loss-of-signal after NOS is no longer recognized. Director Product Manager User Guide 169 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 170
sequence. For corrective actions in response to these link incident messages, refer to the diagnostics chapter in the HP StorageWorks Director 2/64 Service Manual for the Director 2/64 and the HP StorageWorks Director 2/140 Service Manual for the Director 2/140. 170 Director Product Manager User - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 171
Threshold Alerts dialog box. ■ Port-Port number where the alert occurred. ■ Type-The type of alert: transmit (Tx) or receive (Rx). Director Product Manager User Guide 171 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 172
only if the optional Open Trunking feature is installed. For details, refer to Chapter 6, Optional Features, under Open Trunking Log. 172 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 173
are described: ■ Port Diagnostics ■ Swap Ports ■ Collect Maintenance Data ■ Execute an IPL ■ Set Online State ■ Manage Firmware Versions ■ Enable E-Mail Notification ■ Enable Call-Home Notification ■ Backup and Restore Configuration ■ Reset Configuration Director Product Manager User - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 174
use this option, follow the detailed steps in the HP StorageWorks Director 2/64 Service Manual for the Director 2/64 and the HP StorageWorks Director 2/140 Service Manual for the Director 2/140. Swap Ports FICON management option. 6. Click Next to continue. 174 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 175
to technical support personnel. Note: If the Full Volatility feature is enabled through the director's maintenance port, a memory dump file is not included with the data collection. To use this option, follow the detailed steps in the HP StorageWorks Director 2/64 Service Manual for the Director - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 176
an IPL Caution: The Ethernet connection between the HP StorageWorks HA-Fabric Manager (HAFM) server and IML resets both CTP cards). Do not use this option unless directed by your support representative or if you need to reset a failed CTP card. If it is necessary Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 177
functions performed by an IPL, refer to the HP StorageWorks Director 2/64 Service Manual for the Director 2/64 and the HP StorageWorks Director 2/140 Service Manual for the Director 2/140. Set Online State Use to confirm the offline or online state, click OK. Director Product Manager User Guide 177 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 178
the steps in the HP StorageWorks Director 2/64 Service Manual for the Director 2/64 and the HP StorageWorks Director 2/140 Service Manual for the Director 2/140 through the HAFM application. Refer to the HP StorageWorks HA-Fabric Manager User Guide for instructions on configuring e-mail. Note: E-mail - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 179
support center to report system problems. The support center server accepts calls from the HAFM server, logs reported events, and notifies one or more support support contract. To register or order Proactive Services software, contact your HP customer service representative. ■ In classic HP - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 180
of the backup is primarily for single-CTP systems, such as the director, where a backup is needed Choose Backup and Restore Configuration from the Maintenance menu on the menu bar. The Backup when you choose Backup or Restore. 2. Click Backup to save the director speed (Director 2/64 only)). - SNMP - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 181
backup to the server is complete. If the backup fails, a dialog box displays to inform you that the backup instructions on setting the director offline or online, refer to "Set Online State" on page 177. 4. Click Restore on the Backup the date of the restored backup. Note: The restore operation - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 182
this manual. For procedures, refer to the HP StorageWorks Director 2/64 Service Manual for the Director 2/64 and the HP StorageWorks Director 2/140 Service Manual for director must be offline to continue. 2. Set the director offline. For instructions, refer to "Set Online State" on page 177. 3. To - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 183
For a list of values, refer to the HP StorageWorks Director 2/64 Service Manual for the Director 2/64 and the HP StorageWorks Director 2/140 Service Manual for the Director 2/140. Table 7: Data an IP address of 10.32.0.87. 255.0.0.0 0.0.0.0 PROM value Director Product Manager User Guide 183 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 184
tenths) 254 Disabled "public"-5 NULL strings Read only per community 0 for each 162 5 0 0 0 None None None Enabled Disabled NULL string 184 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 185
sections are covered in this chapter: - FICON Management Server - Open Systems Management Server - SANtegrity Binding Features - Enterprise Fabric Mode - Open Trunking Director Product Manager User Guide 185 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 186
Alert Mode must be cleared to enable automatic synchronization of the date and time. - If you manually sets the date and time (Periodic Date/Time Synchronization is not enabled), a confirmation dialog box will and connectivity parameters on the director. 186 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 187
-Consider the language required for the port name display that displays on the HAFM Server. Language support is provided through character set 697 for all Extended Binary-Coded Decimal Interchange Code (EBCDIC) pages Hexadecimal CPGID 0025 0111 0113 0118 Director Product Manager User Guide 187 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 188
you click the check box in the Active=Saved field. When a check mark displays, the Active=Saved mode is enabled. 188 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 189
the Enable Management Server check box. (To disable the management server, click the check box again to remove the check mark.) Director Product Manager User Guide 189 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 190
SAN. This provides security from accidental fabric merges and potential fabric disruption when fabrics become segmented because they cannot merge. 190 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 191
dialog box: ■ WWNs of devices connected to F_Ports (F_Port connection policy). The WWN is the WWN of the attached device's port. Director Product Manager User Guide 191 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 192
Enable Switch Binding check box), click the Enable Switch Binding check box to remove the check mark, then click Activate. 192 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 193
Configure > Switch Binding > Edit Membership List from the Product Manager window. The Switch Binding Membership List dialog box displays, as shown in Figure 64. The WWNs of devices and/or switches that can currently connect to switch ports are listed in the Switch Membership List panel. Director - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 194
Optional Features Figure 64: Switch Binding Membership List dialog box Refer to "Configuring Switch Binding-Overview" on page 191 for information on how the Switch Binding is disabled. ■ The switch or device with the WWN is not connected to the switch. 194 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 195
Fabric Mode will also disable. ■ WWNs can be added to the Switch Membership List when Switch Binding is enabled or disabled. Director Product Manager User Guide 195 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 196
that there are specific requirements for disabling these parameters and features when the director or switch is offline or online. 196 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 197
change notifications (domain RSCNs) are sent between end devices in a fabric to provide additional connection information to host bus adapters and Director Product Manager User Guide 197 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 198
device vendor to determine if disabling this option (and thereby enabling RSCN transmission) will cause problems with your HBA or storage products. Insistent Domain Identification (ID) This is a parameter in disable Enterprise Fabric Mode and Fabric Binding. 198 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 199
congestion thresholds (per port) and low BB_Credit threshold. In particular, you do not need to manually configure ISLs into trunk groups of redundant links where data can be off-loaded. Candidate links for dialog box displays, as shown in Figure 65. Director Product Manager User Guide 199 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 200
display a value under the Threshold % column. This value is computed by the feature's rerouting algorithm. If you click this check 200 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 201
, these notifications occur the first time the events occur. Notifications are not resent while the problem persists. - Unresolved Congestion. Click this check box to display a checkmark and enable notification. in most cases. This step is not required. Director Product Manager User Guide 201 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 202
The Open Trunking Log, as shown in Figure 66 provides details on flow rerouting that is occurring through director ports. 202 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 203
Exit Port-The decimal exit port number on this switch that the flow now uses to get to the target domain. Director Product Manager User Guide 203 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 204
Optional Features 204 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 205
in alphabetical order that display in pop-up message boxes from the HP StorageWorks Director Product Manager application. If you do not find an error message in this list, review the HP StorageWorks HA-Fabric Manager User Guide. The text of each message is followed by a description and recommended - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 206
to complete and try the operation again. Click Yes to delete the firmware version or No to abort the operation. 206 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 207
beaconing again or enable beaconing on operating FRU. Replace FRU and enable beaconing again or enable beaconing on an operating FRU. Director Product Manager User Guide 207 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 208
all E_ports to G_Ports. Delete spaces from the field entry. Replace the failed CTP card and retry the firmware installation. 208 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 209
operation later. If the condition persists, contact the next level of support. Retry the operation later. If the condition persists, contact the next level of support. Retry the operation later. If the condition persists, contact the next level of support. Director Product Manager User Guide 209 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 210
contact the next level of support. Retry the operation later. If the condition persists, contact the next level of support. Retry the operation later. If the condition persists, contact the next level of support. Reset the port and - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 211
Configure Ports dialog box and some ports do not support speed configuration. Action Install a transceiver in the port support. Retry the operation later. If the condition persists, contact the next level of support. Replace ports that do not support speed configuration with those that do support - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 212
some ports do not support speed configuration. Displays if you try and some ports do not support speed configuration. Fibre Channel support speed configuration with those that do support more than one configuration. Replace ports that do not support speed configuration with those that do support - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 213
protected. Action Retry the operation later. If the condition persists, contact the next level of support. Install the firmware after CTP card synchronization completes. Retry the operation later. If the condition . Ensure file name and drive are correct. Director Product Manager User Guide 213 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 214
firmware file from your service representative. Retry the operation later. If the condition persists, contact the next level of support. Retry the operation contact the next level of support. Retry the operation again. If the condition persists, contact the next level of support. Make sure all names - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 215
mode through the Configure FICON Management Server dialog box. Disable clock alert mode through the Configure FICON Management Server dialog box. Director Product Manager User Guide 215 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 216
. Click Yes if you want to continue, and disable Enterprise Fabric Mode. Retry the operation later. If the condition persists, contact the next level of support. 216 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 217
Retry the operation later. If the condition persists, contact the next level of support. Try the file transfer operation again. If the problem persists, contact the next level of support. Enter appropriate information in the Data field. Install E/OS version 5.00.00 or higher on the hardware product - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 218
. If the problem persists, contact the next level of support. Add the firmware version to the library and retry the operation. Disable FICON Management Server, enable the the Open Systems Management Server, or enable the Open Systems management style. 218 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 219
install the feature key or No to not install. Retry the operation. If the problem persists, contact the next level of support. Remove invalid characters from the entry. Use up to 24 alphanumeric characters, including and enter a valid HAFM server IP address. Director Product Manager User Guide 219 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 220
port number must be within a range of ports for the specific director model Director 2/64 only. The Fibre Channel number entered is invalid. The port number must be an firmware download operation. If the problem persists, contact the next level of support. 220 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 221
Configure Open Trunking dialog box. Verify and enter a valid date. Verify and enter a valid number which must be between 2 through 600. Director Product Manager User Guide 221 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 222
and enter a valid time. Enter a number from 1 to 99 into the Threshold % column of the Configure Open Trunking dialog box. 222 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 223
persists, contact the next level of support. Ensure that an optical loopback plug is installed in port optical transceiver before running external wrap diagnostic testing. Delete an existing firmware version before adding a new version. Select a file. Director Product Manager User Guide 223 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 224
overwrite the current date or time. Click OK to set the director offline or click Cancel to cancel the operation. 224 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 225
the diagnostics on an active port. Set the director speed to 2 Gb/sec in the Configure Switch Parameter dialog box. Contact the next level of support to report the problem. Informational message only. Director Product Manager User Guide 225 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 226
, contact the next level of support. Enter a corresponding SNMP trap recipient address. Verify port operation. Retry diagnostics for the port and choose Stop from the dialog box. If problem persists, contact the next level of support. Informational message. 226 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 227
continue. Try the data collection procedure again. If the problem persists, contact the next level of support. Verify the data collection procedure is to be aborted of support. Retry the operation. If the condition persists, contact the next level of support. Director Product Manager User Guide 227 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 228
or switch offline before attempting the configuration change. Establish and verify the network connection. Contact the next level of support to report the problem. Informational message only-no action is required. Disable Enterprise Fabric Mode through the Enterprise Fabric Mode dialog box in - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 229
maximum number of saved address configurations has been reached. This feature is not supported in this software version. Action Cancel the operation. Establish and verify the network connection. Delete using the Configure Feature Key dialog box. Director Product Manager User Guide 229 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 230
feature key activation? Threshold alerts are not supported on firmware earlier than 01.03.00. Unable new feature key. Threshold alerts are not supported on firmware earlier than 01.03.00. support to report the problem. Retry the operation. If the condition persists, contact the next level of support - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 231
HP 19 B backing up and restoring configuration 180 Director Product Manager User Guide Index Index configuration data 157 backup and restore configuration dialog box 180 backup state 112 SBAR card indicator 75 binding, port, error 87 bit-error threshold 169 block all ports dialog box, displaying 82 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 232
table 107 class 3 statistics 108 class of service, node properties dialog box 103 clear system error periodic synchronization 80 configure date and time, manual procedure 80 configure fabric parameters dialog box menu addresses - "active" 138 backup and restore configuration 157 date/time 41 Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 233
log 164 delimiter errors 109 diagnostics, port FPM card menu 82 Director Product Manager User Guide Index port card view menu 89 running 173 dialog boxes 202 address configuration library 139 backup and restore configuration 180 block all ports 82, 89 configure addresses - "active" 138 configure - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 234
level, director properties dialog box 77 enterprise fabric mode 196, 197 equipment symbols 16 error light, clearing 79 error statistics 108 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 235
164 feature SANtegrity Binding 190 feature key 143, 144 configuring 143 Fibre Channel address, port properties dialog box 86 Director Product Manager User Guide Index fibre channel addresses 120 FICON management style Open Systems 123 FICON management server 37, 123, 143, 186 active=saved 187 code - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 236
, 68 help 45 help icon 45 help, obtaining 19 hop counts 121 host control 186 host control prohibited field 188, 190 host, audit log 162 HP authorized reseller 19 Director Product Manager User - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 237
storage website 19 technical support 19 I icons configure 47 help 45 logs 42 view balancing 199 K keyboard navigation in dialog boxes 32 L languages, code page 187 Director Product Manager User Guide Index laser LC transceiver 90 LEDs CTP card switchover 83 port card view 84 SBAR card switchover 84 - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 238
169 M MAC address, default 183 main panel 47 maintenance data, collecting 174 maintenance menu 43 backup and restore configuration 45, 180 collect maintenance data 174 data collection 43 enable call-home notification 44 57, 100 menu 102 node list view menu 57 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 239
style open systems management server 37 Director Product Manager User Guide Index Open Trunking feature 199 dialog box 199 dialog operating parameters default values 184 operating status for the StorageWorks director 2/64 47 operational state, port 95 operational state, port properties dialog box - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 240
product menu 37 resetting 91 statistics description 107 displaying 106 status, determining 53 transmission, blocking 90 type port list view 96 Director Product Manager User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 241
log 169 principal switch, determining 126 problems, event log 164 product manager 100 node list view menu 57 non-English language support 187 overview 32 performance view 57, 105 performance view port menu 51 product 37 Director Product Manager User Guide Index user rights 60 uses, list of 29 view - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 242
dialog box 77 hardware log 168 set director date and time manually 146 set online state dialog box 44 setting online state 177 severity director 2/64 product manager, description 29 stored address configurations, managing 139 subnet mask, default value 183 support center server User Guide - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 243
indicator 74 system error light, clearing 79 T technical support 174 technical support, HP 19 testing, port state 114 text symbols 15 traffic module cards 123 UPM cards 123 user rights 60 Director Product Manager User Guide Index V versions, firmware firmware library dialog box 44 managing 178 view - HP Surestore 64 | fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 244
Index zones, number of, default value 184 zoning configuration, backing up and restoring 181 zoning, default values 184 244 Director Product Manager User Guide
user guide
hp
StorageWorks
director product manager
Product Version:
FW V05.01.00-24/HAFM SW V07.01.00-09
Second Edition June 2003
Part Number:
AA–RTDUB–TE
This guide provides an introduction and overview of the HP StorageWorks Director 2/64
Product Manager and Director 2/140 Product Manager. It also explains how to use Product
Manager features to monitor, manage, and configure a director. Finally it describes how to use
Director 2/64 and Director 2/140 logs and maintenance features.