HP Surestore 64 fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 82
Port Menu, CTP Card Menu
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Monitoring and Managing the Director ■ Block All Ports-Choose this option to display the Block All Ports dialog box. Click Yes to block all ports on the selected card or click No to cancel. ■ Unblock All Ports-Choose this option to display the Unblock All Ports dialog box. Click Yes to unblock all ports on the selected card or No to cancel. ■ Diagnostics-Choose this option to display the Port Diagnostics dialog box. Use this dialog box to run internal loopback and external loopback tests on any port or all ports on the port card. Port Menu Double-click a port on the Port Card View to display the a menu of options for a port. Refer to "Port Menu" on page 89 for details on displaying and using the port menu. CTP Card Menu Right-click the CTP card in the Hardware View to display a menu with the following options: ■ FRU Properties-Choose this option to display a FRU Properties dialog box for the CTP card. Figure 15 is an example for the power supply module. The FRU Properties dialog box includes the FRU name, position (slot number in the backplane), state (active, backup, or failed), part number, serial number, and speed capability. ■ Beaconing-Choose this option to add a check mark to the check box and enable beaconing for the CTP card. This causes the amber LED on the card to flash to help you locate it in the unit. ■ Switchover-Choose this option to display the Switchover CTP dialog box, as shown in Figure 21. Click Switchover to switch operation from the active card to the backup card. When switchover occurs, the green LED illuminates on the backup CTP card to indicate that it is now the active card. Note: You must have maintenance authorization rights to access this feature. 82 Director Product Manager User Guide