HP Surestore 64 fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 206
StorageWorks Director Product Manager Messages, Table 9: Product Manager Messages, Product Manager
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
Information and Error Messages StorageWorks Director Product Manager Messages This section lists StorageWorks Director Product Manager information and error messages in alphabetical order. Table 9: Product Manager Messages Message A Product Manager instance is already open. Activating this configuration will overwrite the current configuration. All configuration names must be unique. All FPM ports will be held inactive while the director is configured to 2 Gb/sec speed. Do you want to continue? All port names must be unique. Another Product Manager is currently performing a firmware install. Are you sure you want to delete firmware version? Description Only one instance of the Product Manager application can be open at one time. Confirmation to activate a new address configuration. All address configurations must be saved with unique names. Occurs when FPM cards are installed in the director and director speed is being set to 2 Gb/sec in the Configure Switch Parameters dialog box. A duplicate Fibre Channel port name was configured. All port names must be unique. Only one instance of the Product Manager application can install a firmware version to the director at a time. This message requests confirmation to delete a firmware version. Firmware library can store up to 8 firmware versions. Action Close the open Product Manager application so the desired instance of the Product Manager application can be opened. Click Yes to confirm activating the new address configuration or No to cancel the operation. Save the configuration with a different name that is unique to all saved configurations. Replace FPM cards with UPM cards (UPM cards operate at 1 and 2 Gb/sec) or set the director speed to 1 Gb/sec. Reconfigure the Fibre Channel port with a unique name. Wait for the firmware installation process to complete and try the operation again. Click Yes to delete the firmware version or No to abort the operation. 206 Director Product Manager User Guide