HP Surestore 64 fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 118
Configuring Director Identification, Con Identification dialog box, Location, Contact
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Configuring the Director Configuring Director Identification Perform this procedure to configure the director name, description, location, and contact person for HAFM. The information displays in multiple dialog boxes throughout the application. In addition, the Name, Location, and Contact variables configured in the Configure Identification dialog box correspond respectively to the SNMP variables sysName, sysLocation, and sysContact. These variables are used by SNMP management workstations when obtaining data from managed directors. Follow these steps to configure the director identification. 1. At the Hardware View page, choose Configure > Identification. The Configure Identification dialog box displays, as shown in Figure 31. Figure 31: Configure Identification dialog box a. Type a director name of 24 or fewer alphanumeric characters in the Name field. Each director should be configured with a unique name. If the director is installed on a public LAN, the name should reflect the director's Ethernet network DNS host name. For example, if the DNS host name is SAN140.hp.com, the name entered in this dialog box is SAN140. b. Type a director description of 255 or fewer alphanumeric characters in the Description field. c. Type the director's physical location (255 or fewer alphanumeric characters) in the Location field. d. Type the name of a contact person (255 or fewer alphanumeric characters) in the Contact field. 2. Click Activate to save the information and close the dialog box. 118 Director Product Manager User Guide