HP Surestore 64 fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 165
Description, Severity, FRU Position, BKPLNE
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Using Logs - GLSL-G_Port, long wave, single-mode LC connector, 1 Gigabit - GSML-G_Port, short wave, multi-mode, LC connector, 1 Gigabit - GXXL-G_Port, mixed mode, LC connector, 1 Gigabit - FPM-G_Port, small form factor optics (SFO) pluggable, FICON port module, 1 Gigabit - UPM-G_Port, small form factor optics (SFO) pluggable, universal port module, 2 Gigabit - GSF2-G_Port, small form factor optics (SFO) pluggable, universal port module, 2 Gigabit - GLSR-G_Port, short wave, single-mode, MT-RJ connector, 1 Gigabit - GXXR-G_Port, mixed mode, MT-RJ connector, 1 Gigabit - GSMR-G_Port, short wave, multi-mode, MT-RJ connector, 1 Gigabit The chassis (slot) position for a non-redundant FRU is 0. The chassis positions for redundant FRUs are 0, 1, and 2. The chassis positions for port cards are 0 through 35, and slot 32 is unavailable. ■ Description-A short description of the event. ■ Severity-There are four classifications of severity that identify the importance of the event. - 0=Informational - 2=Minor - 3=Major - 4=Severe (not operational) ■ FRU Position-An acronym representing the FRU type, followed by a number representing the FRU chassis position. FRU acronyms are: - BKPLNE-backplane - CTP-CTP card - SBAR-SBAR card - Port-card - FAN-fan module - PWR-power supply Director Product Manager User Guide 165