HP Surestore 64 fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 78
Using Menu Options, Director Menu, Hardware View, Director Properties, Con Identification
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Monitoring and Managing the Director Note: The director model and firmware may not support 2 Gb/sec data speeds. ■ Switch Binding. Enabled if the optional SANtegrity Binding features are installed and enabled, otherwise Disabled displays. Note: You can also display the Director Properties dialog box when you right-click the director illustration away from a FRU and choose Properties from the menu. Using Menu Options Right-click various parts of the Hardware View to display menu options for displaying status and information and for controlling the director and its FRUs. Director Menu Right-click any area of the director illustration where a hardware component is not installed to display the following menu options: Director Properties Click to display the Director Properties dialog box. This dialog box contains the director name, description, location, director data speed, and contact person configured through the Configure Identification dialog box. Also included is other product information as detailed in "Displaying Director Information" on page 76. You can also display this dialog box when you click an area on the illustration away from a hardware component. Enable Unit Beaconing Click the check box to toggle unit beaconing on or off. When the check box has a check mark, unit beaconing is on, and the amber system error light on the director front bezel blinks to help users locate the actual unit in an equipment room. When you click the check box to remove the check mark, unit beaconing is disabled and the amber LED goes out. Note: You can only enable beaconing if there are no system errors (the system error light is off). 78 Director Product Manager User Guide