HP Surestore 64 fw 05.01.00 and sw 07.01.00 - Director Product Manager - User - Page 132
Bind All Ports to Attached WWN, Set All to E_Ports
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Configuring the Director - Set All LIN Alerts-Places a check mark in all check boxes in this column. LIN alerts will be enabled for all ports on the switch. ■ Type (open systems management style only) - Set All to F_Ports-Sets all fields in this column to F_Port and configures all ports on the switch as F_Ports. - Set All to G_Ports-Sets all fields in this column to G_Port and configures all ports on the switch as G_Ports. - Set All to E_Ports-Sets all fields in this column to E_Port and configures all ports on the switch as E_Ports. ■ Port Binding - Bind All WWNs-Places a check mark in all check boxes in this column and binds each port to the device with the WWN or nickname entered in the Bound WWN column for that port. - Unbind All WWNs-Removes check marks in all check boxes in this column. A device with any WWN can attach to all ports. - Bind All Ports to Attached WWN-Places a check mark in all check boxes in this column and binds each port to the device currently attached to that port. The Bound WWN column will display that device's WWN. - Bind Port to Attached WWN-Places a check mark in the check box for the port where you clicked to display the menu. This binds that port to the device currently attached to that port. The Bound WWN column will display that device's WWN. - Clear All Bound WWNs-Clears all WWNs listed in the Bound WWN column. ■ Speed - Set All to 1 Gb/sec-Sets the port optics to a 1 Gb/sec data rate. - Set All to 2 Gb/sec-Sets the port optics to a 2 Gb/sec data rate. - Set All to Negotiate-Allows the port to negotiate the data rate with the attached device. Note: Your director model, firmware, and port cards may not allow 2 Gb/sec data speeds. ■ Bound WWN 132 Director Product Manager User Guide