Hitachi DZ-MV270A Owners Guide - Page 102

Message Cannot move scene in program mode. (1) Disc is not formatted. If it formats, it becomes possible to use for camera. (2) However, when you record from PC connection terminal, please do not format. (3) Format the disc now? In DVD-R Disc, Video mode of the disc recorded once cannot be changed. Finalize may not be complete. Finalize again now? Disc error has occurred. Finalizing is not complete. Scenes over limit. Cannot move scenes. Top scene cannot be divided. End scene cannot be divided. Photo cannot be divided. Cannot combine scene. Same scenes on Play List will be deleted. Delete scenes? This disc is recorded by the PAL system. Please replace disc. English This disc cannot be used. Please replace disc. Cause & Troubleshooting Move was executed when a program was selected. Reference page 72 DVD-R disc that was not initialized for camera use was inserted. 38 With DVD-R disc, the movie quality mode once used for recording cannot be changed. 58 Instantaneous shutoff occurred during finalizing, after which power was supplied and disc was inserted. 89 Disc error occurred during finalizing, and finalizing failed. Replace the disc. 89 An attempt was made to move a scene, even though number of storable scenes was exceeded. Division is not possible at the start of scene. Division is not possible at the end of scene. Still image cannot be divided. Unless consecutive scenes are selected, they cannot be combined. This will appear when scenes are to be deleted. 68, 84 83 83 84 83 80 This DVD video camera/recorder can use only discs recorded on the NTSC system. A disc recorded on the PAL system cannot be used on this DVD video cam- - era/recorder. A disc that cannot be used on this DVD video cam- era/recorder has been loaded. Check the type of disc. 23 102