Hitachi DZ-MV270A Owners Guide - Page 56

Using the Electronic Image Stabilizer (EIS) This DVD video camera/recorder is equipped with an electronic image stabilizer function: When you use zoom to record a magnified subject image, it will correct fuzziness in the recorded image. 1 Press the MENU button in the recording pause status. The menu screen will appear. G Checking EIS On or Off You can check EIS On or Off by the on-screen information display. 2 Use the joystick to choose "EIS" on the "Camera Functions Setup" screen, and then press the button. The options will appear on the right of "EIS". 3 Use the joystick to choose the desired option, and then press the button: The selected option will be set. 4 Press the MENU button. The menu screen will disappear. EIS After recording with EIS set to "Off", it is recommended that you return the setting to "On" and then turn the DVD video camera/recorder off, unless you normally record with "Off" setting. This function is effective only during movie recording: It will not work during still recording. Note: The EIS setting will not change if the DVD video camera/recorder is turned off. Note: Although you can switch EIS between on and off during still r ecording, the setting will be effective only during movie recording. Note: It is r ecommended that you specify "EIS Off" when using the DVD video camera/recorder on a desk or tripod. Note: When "EIS On" is specified, there will be a slight difference between the actual movement and the movement on screen. Note: Gross camera shake may not be entirely corrected even if "EIS On" is specified. Note: EIS may not operate correctly when the conversion lens (optional) is used. English 56