Lexmark MX6500e User's Guide - Page 138

Faxing 138 Notes: • View the scanner IP address on the scanner home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Security > Set Date and Time. 3 In the Manually Set Date & Time field, enter the current date and time. 4 Click Submit. Note: It is recommended to use the network time. Configuring the scanner to observe daylight saving time The scanner can be set to automatically adjust for daylight saving time: 1 Type the scanner IP address in the address field of your Web browser. If you do not know the IP address of the scanner, then you can: • View the IP address on the scanner control panel in the TCP/IP section under the Networks/Ports menu. • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section. 2 Click Security > Set Date and Time. 3 Select the Automatically Observe DST check box, and then enter the DST start and end dates in the Custom Time Zone Setup section. 4 Click Submit. Sending a fax You can use the scanner to send a fax to one or more recipients in a number of ways. You can type the e‑mail address, use a shortcut number or use the address book. You can also use the Multi Send or MyShortcut application from the scanner home screen. For more information, see the "Activating the home screen applications" section of the User's Guide. Sending a fax using the touch screen 1 Load an original document facedown into the ADF or on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 2 If you are loading a document into the ADF, then adjust the paper guides. 3 On the home screen, touch Fax.