Lexmark MX6500e User's Guide - Page 196
Timeouts, Notes, Error Recovery
View all Lexmark MX6500e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
Understanding printer menus Use Timeouts Prolong Screen Timeout On Off Timeouts Print Timeout Disabled 1-255 Timeouts Wait Timeout Disabled 15-65535 Timeouts Job Hold Timeout 5-255 Error Recovery Auto Reboot Reboot when idle Reboot always Reboot never Error Recovery Max Auto Reboots 1‑20 196 To Set the scanner to continue a specified job without returning to the homescreen when the screen timeout timer expires. Note: Off is the factory default setting. Set the amount of time in seconds the scanner waits to receive an end‑of‑job message before canceling the remainder of the print job. Notes: • 90 is the factory default setting. • When the timer expires, any partially printed page still in the printer is printed, and then the scanner checks to see if any new print jobs are waiting. • Print Timeout is available only when using PCL emulation. This has no effect on PostScript emulation print jobs. Set the amount of time in seconds the scanner waits for additional data before canceling a print job. Notes: • 40 is the factory default setting. • Wait Timeout is available only when the scanner is using PostScript emulation. This has no effect on PCL emulation print jobs. Set the amount of time the scanner waits for user intervention before it holds jobs that require unavailable resources and continues to print other jobs in the print queue. Notes: • 30 is the factory default setting. • This menu appears only when a formatted, working scanner hard disk is installed. Set the scanner and the printer to restart when an error is encountered. Note: "Reboot when idle" is the factory default setting. Determine the number of automatic reboots the scanner and the printer can perform. Notes: • 2 is the factory default setting. • If the scanner and the printer perform a number of automatic reboots that is the same as the menu setting within a certain amount of time, then the scanner shows the applicable error instead of the devices restarting.