Lexmark MX6500e User's Guide - Page 187

Understanding printer menus 187 Security Audit Log menu Use Export Log Delete Log Yes No Configure Log Enable Audit Yes No Enable Remote Syslog No Yes Remote Syslog Facility 0-23 Severity of events to log 0-7 To Let an authorized user export the audit log. Notes: • To export the audit log from the scanner control panel, a flash drive must be attached to the scanner. • The audit log can be downloaded from the Embedded Web Server and saved on a computer. Specify whether to delete audit logs. Note: Yes is the factory default setting. Configure the printer to record events in the secure audit log. Notes: • Enable Audit determines if events are recorded in the secure audit log and remote syslog. No is the factory default setting. • Enable Remote Syslog determines if logs are sent to a remote server. No is the factory default setting. • Remote Syslog Facility determines the value used to send logs to the remote syslog server. 4 is the factory default setting. • If the security audit log is activated, then the severity value of each event is recorded. 4 is the factory default setting. Set Date and Time menu Use Current Date and Time Manually Set Date and Time Time Zone Automatically Observe DST On Off To View the current date and time settings for the scanner. Enter the date and time. Note: Date/Time is set in YYYY-MM-DD HH:MM:SS format. Select the time zone. Note: GMT is the factory default setting. Set the scanner to use the applicable daylight saving time (DST) start and end times associated with the scanner Time Zone setting. Note: On is the factory default setting and uses the applicable Daylight Saving Time associated with the Time Zone setting.