Lexmark MX6500e User's Guide - Page 179
Job Buffering, Notes, Advanced Status, Protocol, Honor Init, Parallel Mode 2, Mac Binary PS, ENA
View all Lexmark MX6500e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Understanding printer menus 179 Menu item Job Buffering Off On Auto Advanced Status On Off Protocol Fastbytes Standard Honor Init Off On Parallel Mode 2 On Off Mac Binary PS Auto On Off ENA Address yyy.yyy.yyy.yyy ENA Netmask yyy.yyy.yyy.yyy Description Temporarily stores print jobs on the scanner hard disk before printing Notes: • Off is the factory default setting. • On buffers print jobs on the scanner hard disk. • Auto buffers print jobs only if the scanner is busy processing data from another input port. • Changing this setting from the scanner control panel and then exiting the menus causes the scanner to restart. The menu selection is then updated. Enables bidirectional communication through the parallel port Notes: • On is the factory default setting. • Off disables parallel port negotiation. Specifies the parallel port protocol Notes: • Fastbytes is the factory default setting. It provides compatibility with most existing parallel ports and is the recommended setting. • Standard tries to resolve parallel port communication problems. Determines if the scanner honors hardware initialization requests from the computer Notes: • Off is the factory default setting. • The computer requests initialization by activating the Init signal from the parallel port. Many personal computers activate the Init signal each time the computer is turned on. Determines if the parallel port data is sampled on the leading or trailing edge of a strobe Note: On is the factory default setting. Sets the printer to process Macintosh binary PostScript print jobs Notes: • Auto is the factory default setting. • Off filters print jobs using the standard protocol. • On processes raw binary PostScript print jobs. Sets the network address information for an external print server Note: This menu is available only if the scanner is attached to an external print server through the USB port. Sets the netmask information for an external print server Note: This menu appears only when the scanner is attached to an external print server through the USB port.