Lexmark MX6500e User's Guide - Page 177
NPA Mode, Notes, USB Buffer, Job Buffering, Mac Binary PS, ENA Address, ENA Netmask
View all Lexmark MX6500e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Understanding printer menus 177 Menu item Description NPA Mode Auto On Off Sets the scanner to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol Notes: • Auto is the factory default setting. Auto sets the scanner to examine data, determine the format, and then process it appropriately. • Changing this setting from the scanner control panel and then exiting the menus causes the scanner to restart. The menu selection is then updated. USB Buffer Auto 3KB to [maximum size allowed] Disabled Sets the size of the USB input buffer Notes: • Auto is the factory default setting. • Disabled turns off job buffering. Any jobs already buffered on the scanner hard disk are printed before normal processing resumes. • The USB buffer size value can be changed in 1-KB increments. • The maximum size allowed depends on the amount of memory in the scanner, the size of the other link buffers, and whether Resource Save is set to On or Off. • To increase the maximum size range for the USB Buffer, disable or reduce the size of the parallel, serial, and network buffers. • Changing this setting from the scanner control panel and then exiting the menus causes the scanner to restart. The menu selection is then updated. Job Buffering Off On Auto Temporarily stores print jobs on the scanner hard disk before printing Notes: • Off is the factory default setting. • On buffers jobs on the scanner hard disk. • Auto buffers print jobs only if the scanner is busy processing data from another input port. • Changing this setting from the scanner control panel and then exiting the menus causes the scanner to restart. The menu selection is then updated. Mac Binary PS Auto On Off Sets the scanner to process Macintosh binary PostScript print jobs Notes: • Auto is the factory default setting. • On processes raw binary PostScript print jobs. • Off filters print jobs using the standard protocol. ENA Address yyy.yyy.yyy.yyy Sets the network address information for an external print server Note: This menu appears only if the scanner is attached to an external print server through the USB port. ENA Netmask yyy.yyy.yyy.yyy Sets the netmask information for an external print server Note: This menu appears only if the scanner is attached to an external print server through the USB port.