Lexmark MX6500e User's Guide - Page 303

Troubleshooting 303 Install Tray [x] Try one or more of the following: • Install the specified tray: 1 Turn off the printer and the scanner. 2 Unplug the power cord from the electrical outlet. 3 Install the specified tray. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn on the printer and the scanner. • Cancel the print job. • Reset the active bin. Insufficient memory for Flash Memory Defragment operation [37] Try one or more of the following: • From the scanner control panel, touch Continue to stop the defragmentation and continue printing. • Delete fonts, macros, and other data in the printer memory. • Install additional printer memory. Insufficient memory to collate job [37] Try one or more of the following: • From the scanner control panel, touch Continue to print the part of the job already stored and to begin collating the rest of the print job. • Cancel the current print job. Insufficient memory to support Resource Save feature [35] Install additional scanner memory or touch Continue to disable Resource Save, to clear the message, and to continue printing. Insufficient memory, some Held Jobs were deleted [37] From the scanner control panel, touch Continue to clear the message. Insufficient memory, some held jobs will not be restored [37] Try one or more of the following: • From the scanner control panel, touch Continue to clear the message. • Delete other held jobs to free up additional scanner memory.