Lexmark MX6500e User's Guide - Page 61

Additional scanner and printer setup 61 Use To Search for networks Show available wireless connections. Note: This menu item shows all broadcast secured or unsecured SSIDs. Enter a network name Manually type the SSID. Note: Make sure to type the correct SSID. Wi‑Fi Protected Setup Connect the scanner to a wireless network using Wi‑Fi Protected Setup. 3 Follow the instructions on the scanner display. Connecting the scanner to a wireless network using Wi‑Fi Protected Setup Before you begin, make sure that: • The access point (wireless router) is Wi‑Fi Protected Setup (WPS) certified or WPS‑compatible. For more information, see the documentation that came with your access point. • A wireless network adapter installed in your scanner is attached and working properly. For more information, see the instruction sheet that came with the wireless network adapter. Using the Push Button Configuration method 1 From the scanner control panel, navigate to: > Network/Ports > Network [x] > Network [x] Setup > Wireless > Wireless Connection Setup > Wi‑Fi Protected Setup > Start Push Button Method 2 Follow the instructions on the scanner display. Using the Personal Identification Number (PIN) method 1 From the scanner control panel, navigate to: > Network/Ports > Network [x] > Network [x] Setup > Wireless > Wireless Connection Setup > Wi‑Fi Protected Setup > Start PIN Method 2 Copy the eight‑digit WPS PIN. 3 Open a Web browser, and then type the IP address of your access point in the address field. Notes: • The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 4 Access the WPS settings. For more information, see the documentation that came with your access point. 5 Enter the eight‑digit PIN, and then save the setting.