Lexmark MX6500e User's Guide - Page 59

Additional scanner and printer setup 59 d From the Easy Install screen, click Install. e Type the user password, and then click OK. All the necessary applications are installed on the computer. f Click Close when the installation is complete. 4 Add the scanner. • For IP printing: a From the Apple menu, navigate to either of the following: - System Preferences > Print & Scan - System Preferences > Print & Fax b Click +. c If necessary, click Add Printer or Scanner or Add Other Printer or Scanner. d Click the IP tab. e Type the scanner IP address in the address field, and then click Add. • For AppleTalk printing: Notes: - Make sure AppleTalk is activated on your scanner. - This feature is supported only in Mac OS X version 10.5. a From the Apple menu, navigate to: System Preferences > Print & Fax b Click +, and then navigate to: AppleTalk > select your scanner > Add Note: If the scanner does not show up in the list, then you may need to add it using the IP address. For more information, contact your system support person. Preparing to set up the scanner on a wireless network Notes: • Make sure your access point (wireless router) is turned on and is working properly. • Do not connect the installation or network cables until prompted to do so by the setup software. Make sure you have the following information before setting up the scanner on a wireless network: • SSID-The SSID is also referred to as the network name. • Wireless Mode (or Network Mode)-The mode is either infrastructure or ad hoc. • Channel (for ad hoc networks)-The channel defaults to automatic for infrastructure networks. Some ad hoc networks will also require the automatic setting. Check with your system support person if you are not sure which channel to select.