Lexmark X342N Service Manual - Page 20

7003-XXX Fax Specifications Transmission rate 3 pages per minute Compression MH, MR, MMR Resolutions Receive: 200X100 dpi, 200X200 dpi, 300X300 dpi, 400X400 dpi, 204X98 dpi, 204X196 dpi, 204X391 dpi, 408X391 dpi Send: 200X100 dpi, 200X200 dpi, 300X300 dpi Modem speed 2400-33,600 BPS maximum, V34 half duplex. 7200-14,400 BPS, V.17 2400-4800 BPS, V.27 7200-9600 BPS, V29 Speed dial Maximum of 99 (Based on 10 digit phone numbers) Group fax 99 locations (Based on 10 digit phone numbers with a maximum of 512 characters) Broadcast 209 locations Manual fax Yes Fax from PC Not supported Tips on preventing jams You can avoid most paper jams by correctly loading paper and specialty media. The following hints can help you avoid paper jams: • Do not load wrinkled, creased, or damp paper. • Never mix media types within a tray. • Flex, fan, and straighten paper before you load it. • Do not exceed the maximum stack height. • Push all trays firmly into the printer after loading them. • Make sure the guides in the trays are positioned snugly against the paper or specialty media. • Do not remove paper trays while a job is printing. Wait for a Load Paper or Ready light sequence before you remove the tray. • Before loading transparencies, fan the stack to prevent sheets from sticking together. • Do not use envelopes that: - Have excessive curl - Are stuck together - Are damaged in any way - Contain windows, holes, perforations, cutouts, or embossing - Have metal clasps, string ties, or metal folding bars - Have postage stamps attached - Have any exposed adhesive when the flap is in the sealed position • Use only recommended paper. Refer to the Card Stock & Label Guide available on the Lexmark Web site at www.lexmark.com for more information about which paper provides optimum results for the current printing environment. 1-6 Service Manual manuals4you.com