NEC NP1150 NP1150/2150/3150/3151W user's manual - Page 48
(8) Turning off the Projector, (9) After Use
UPC - 805736019568
View all NEC NP1150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
3. Projecting an Image (Basic Operation) Turning off the Projector To turn off the projector: 1. Press the POWER (ON/STAND BY) button on the projector cabinet or the POWER OFF button on the remote control. The [Power Off / Are you sure?] message will appear. 3D.REFORM AUTO.ADJUST SOURCE ON/STAND.BY USB LAMP STATUS POWER POWER OFF VIDEO COMPUTER 1 2 COMPONENT S-VIDEO 3 POWER ON VIEWER NETWORK MENU SELECT ENTER EXIT 2. Press the ENTER button After the projector turns off, the cooling fans keep operating for a while (Cooling-off time). The cooling fans stop operating when the projector turns off and goes into standby mode. When in standby mode, the POWER indicator will light orange and the STATUS indicator will light green. 3. After making sure that the projector is in standby mode, turn off the Main Power switch. The power indicator will go out. About Direct Power Off The projector has a feature called "Direct Power Off". This feature allows the projector to be turned off (even when projecting an image) using a power strip equipped with a switch and a breaker. NOTE: Before using Direct Power Off, be sure to allow at least 20 minutes immediately after turning on the projector and starting to display an image. WIRELESS WIRELESS 3D.REFORM AUTO.ADJUST SOURCE ON/STAND.BY USB LAMP STATUS POWER POWER OFF VIDEO COMPUTER 1 2 COMPONENT S-VIDEO 3 POWER ON VIEWER NETWORK MENU SELECT ENTER EXIT SELECT LEFT LENS SHIFT RIGHT DDOOWWNN UUPP 3D REFORM AUTO ADJUST SOURCE ON/STAND BY POWSETRATLUASMUPSB CAUTION • Do not unplug the power cable from the wall outlet or projec- tor when the projector is powered on. Doing so can cause damage to the AC IN connector of the projector and (or) the prong plug of the power cable. To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and a breaker. • Do not turn off the AC power supply within 10 seconds of making adjustment or setting changes and closing the menu. Doing so can cause loss of adjustments and settings and return to default. After Use Preparation: Make sure that the main power is turned off. 1. Unplug the power cable. 2. Disconnect any other cables. 3. Retract adjustable tilt feet if extended. 4. Cover the lens with the lens cap. 34