Netgear WC7500-Wireless User Manual - Page 111

ProSAFE Wireless Controller 6. Configure the settings as described in the following table. Setting Description Update From Select one of the following radio buttons to specify the license update server: • Default Update Server. The default license update server is used. • Specify Update Server. You must specify the license update server. Fill in the Server Address field. Server Address Enter the IP address or FQDN of the server from which you import your licenses. By default, the FQDN of the NETGEAR license server is update1.eng.netgear.com. Use a Proxy Server to Select the Use a Proxy Server to Connect to the Internet check box if you use Connect to the Internet a proxy server to connect to the Internet. Proxy Server Enter the IP address or FQDN of the proxy server. Proxy Port Enter the port that the proxy server uses. This Proxy Server If the proxy server requires authentication, specify the user name and password. Requires Authentication User Name Enter the user name to access the proxy server. Password Enter the password to access the proxy server. 7. Click the Apply button. Your settings are saved. Register Your Licenses With the License Server You must purchase licenses before you can register them. For more information, see Licenses on page 17)  To register your licenses: 1. Open a web browser, and in the browser's address field, type the wireless controller's IP address. By default, the IP address is 192.168.0.250. The wireless controller's login window opens. 2. Enter your user name and password. 3. Click the Login button. The wireless controller's web management interface opens and displays the Summary page. 4. Make sure that the wireless controller is connected to the Internet. 5. Select Maintenance > Licensing. 6. Click the Registration tab. Configure the System and Network Settings and Register the Licenses 111