Netgear WC7500-Wireless User Manual - Page 170
Change Access Point Information on the Managed AP List
View all Netgear WC7500-Wireless manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
ProSAFE Wireless Controller Change Access Point Information on the Managed AP List For each individual access point, you can change the general information, IP settings, and VLAN settings, you can switch between the internal and external antenna (if the access point supports an external antenna), and you can enter location information. For a WAC740 access point that is on the managed list, you can also enable link aggregation by using the following procedure. Link aggregation is required if you want to set up a link aggregation group (LAG) connection between the WAC740 access point and a switch. For more information about setting up a LAG connection for a WAC740 access point, see Enable Link Aggregation on a WAC740 Access Point on page 382. Note: Do not confuse link aggregation for a WAC740 access point with link aggregation for a WC7600v1 or WC9500 wireless controller (see Controller Link Aggregation Concepts on page 103), which is a configuration between the WC7600v1 or WC9500 wireless controller and a switch or router. To change the information for an access point on the Managed AP List: 1. Open a web browser, and in the browser's address field, type the wireless controller's IP address. By default, the IP address is 192.168.0.250. The wireless controller's login window opens. 2. Enter your user name and Change Access Point Information on the Managed AP List on page 170. 3. Click the Login button. The wireless controller's web management interface opens and displays the Summary page. 4. Select Access Point > Managed AP List. The Managed AP List page displays. 5. Select the access point that you want to change by selecting its radio button in the Edit column of the Managed AP List. 6. Click the Edit button. Discover and Manage Access Points 170