Netgear WC7500-Wireless User Manual - Page 390
Factory Default Settings, Technical Specifications, and Passwords Requirements, Table 15.
View all Netgear WC7500-Wireless manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 390 highlights
ProSAFE Wireless Controller Table 15. Password requirements (continued) Web Management Interface Path User Type or Data Encryption Restrictions Allowed Characters Length Section in This Manual Advanced profile: Shared Key 64-bit WEP 1. Select Configuration > Profile > Advanced > Radio. 2. Select a group. 3. Click Edit. WPA-PSK 4. Select a profile. 128-bit WEP 152-bit WEP TKIP TKIP + AES 5. Make a selection from the Network Authentication menu. WPA2-PSK AES TKIP + AES Hexadecimal 10 fixed Hexadecimal 26 fixed Hexadecimal 32 fixed Alphanumerics and Up to 63 special characters, excluding quotes See Manage Security Profiles for Advanced Profile Groups on page 129. WPA-PSK TKIP + AES & WPA2-PSK Select Configuration > External Security > Authentication RADIUS Server. Server Shared Secret External LDAP Server Domain Admin User Alphanumerics and special characters Alphanumerics and special characters Up to 127 See Manage Authentication Servers and Authentication Up to 32 Server Groups on page 140. 1. If your admin password contains special characters (for example, P or ^) and you upgrade the firmware from version 4.x to version 5.x, you first must change the password to one with alphanumeric characters only (for example, password4285) before you upgrade the firmware. Make sure that you back up the configuration before you upgrade the firmware. After you successfully upgrade the firmware to version 5.x, you can change the password back to your original password with special characters. Factory Default Settings, Technical Specifications, and Passwords Requirements 390