Netgear WC7500-Wireless User Manual - Page 263

ProSAFE Wireless Controller 5. Enable SNMP and configure the settings as described in the following table. Setting Description SNMP Select the SNMP check box to enable SNMP for the wireless controller. Read-Only Community Name Enter the community string that allows the SNMP manager to read the wireless controller's MIB objects. The default setting is public. Read-Write Community Name Enter the community string that allows the SNMP manager to read and write the wireless controller's MIB objects. The default setting is private. Trap Community Name Enter the community name that is associated with the IP address to receive traps. The default setting is trap. IP Address to Receive Traps Enter the IP address at which the SNMP manager receives traps sent from the wireless controller. Trap Port Enter the port on which the SNMP manager receives traps sent from the wireless controller. The default setting is port 162. SNMP Manager IP Enter the IP address of the SNMP manager. To allow any SNMP manager to access the wireless controller, keep this field blank. 6. Click the Apply button. Your settings are saved. Specify Session Time-Outs If an HTTP session times out, the user is redirected to the login page for password verification. Maintain the Wireless Controller and Access Points 263