Netgear WC7500-Wireless User Manual - Page 293

ProSAFE Wireless Controller The following figure shows a configuration with a primary controller and a redundant controller after a failover occurred in which the primary controller went down and the redundant controller became the active controller. Figure 21. Primary and redundant controllers after a failover Configure a Single Controller With Redundancy To enable 1:1 redundancy, configure the secondary IP address (that is, the IP address for the redundant controller), the VRPP ID for the connection between the primary and the redundant controller, and the local IP address for the primary controller. Both controllers require matching licenses. If licenses do not match, redundancy cannot be established. For additional requirements, see Requirements and Restrictions for 1:1 Redundancy on page 291.  To configure a single controller with redundancy: 1. Open a web browser, and in the browser's address field, type the wireless controller's IP address. By default, the IP address is 192.168.0.250. The wireless controller's login window opens. 2. Enter your user name and password. 3. Click the Login button. The wireless controller's web management interface opens and displays the Summary page. 4. Select Stacking. Manage Stacking and Redundancy 293