Netgear WC7500-Wireless User Manual - Page 115

ProSAFE Wireless Controller  To configure the syslog settings for an internal location: 1. Open a web browser, and in the browser's address field, type the wireless controller's IP address. By default, the IP address is 192.168.0.250. The wireless controller's login window opens. 2. Enter your user name and password. 3. Click the Login button. The wireless controller's web management interface opens and displays the Summary page. 4. Select Configuration > System > Alerts/Logs > Logs/Syslog. 5. In the Syslog Settings section of the page, configure the settings as described in the following table. Setting Enable Syslog Log Level Syslog Location Description Enable the syslog settings using the Enable Syslog check box to forward system wide logs to an external syslog server or to save to a storage device such as a USB or SD card connected to the wireless controller. By default, the syslog settings are disabled. From the Log Level menu, select one of the following levels: • LOG_LEVEL_CRIT. Critical errors only are logged. • LOG_LEVEL_ERR. Noncritical errors and critical errors are logged. • LOG_LEVEL_WARN. Warnings, noncritical errors, and critical errors are logged. • LOG_LEVEL_NOTICE. Notifications, warnings, noncritical errors, and critical errors are logged. • LOG_LEVEL_INFO. Informational messages, notifications, warnings, noncritical errors, and critical errors are logged. Select the Internal radio button if you have already mounted a storage device (see Manage Extended Storage on page 260). Configure the System and Network Settings and Register the Licenses 115