Netgear WC7500-Wireless User Manual - Page 319
The following table describes the fields of the Clients Description
View all Netgear WC7500-Wireless manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 319 highlights
ProSAFE Wireless Controller The following table describes the fields of the Clients page. Item Select MAC IP Location AP-Name AP-IP AP-MAC Client Type Usage (KBytes) Description The radio button that lets you select the client. The MAC address of the WiFi client. The IP address of the WiFi client. Note the following: • If clients and the access point to which they are connected are in the same VLAN, all receive an IP address from the same DHCP server. • If clients and the access point to which they are connected are not in the same VLAN, you must provide a DHCP server for the client VLAN. • If clients are not connected to any DHCP server, IP addresses in the 169.254.x.x. range are assigned automatically. The location of the access point (see Change Access Point Information on the Managed AP List on page 170) to which the WiFi client is connected. The name of the access point (see Change Access Point Information on the Managed AP List on page 170) to which the WiFi client is connected. The IP address of the access point to which the WiFi client is connected. The MAC address of the access point to which the WiFi client is connected. The wireless mode that the WiFi client is using to connect to the access point (802.11ng, 802.11bg, 802.11b, 802.11ac, 802.11na, or 802.11a). The traffic usage of the WiFi client in KB. Monitor the WiFi Network and Its Components 319